10V-60V DC Motor Speed Regulation Module PWM Controller 20A Motor Driver in Pakistan
₨1,300- 10V-60V DC Motor Speed Regulation Module PWM Controller 20A Motor Driver
- Output voltage: Linear loading
- Input voltage: DC10-60V
- Output current: 0-20A
- Continuous current: 1200W
12v hw-687 5a Mini DC Motor PWM Speed Controller Module in Pakistan
Original price was: ₨300.₨230Current price is: ₨230.DC motor PWM governor 3V6 12 24 35V speed control ultra-small LED dimmer 5A (C6A4)
2000W 50 220V 25A PWM Motor Speed Controller for Electric Stove Lighting Dimmer in Pakistan
Original price was: ₨470.₨418Current price is: ₨418.- The voltage is 50-220V.
- The current is 25A.
- Power is 2000W
- Its Size is 52*47*27mm/2*1.85*1in Operation
- Environment Temperature is between -20℃-40℃
2212 950KV Brushless DC Motor BLDC 1 pair in Pakistan
₨2,500- Model: B2212
- KV value: KV920KV
- Weight: 62g
- Direction: clockwise (black) / counterclockwise (silver)
- Scope of use:
- DJI Phantom 1/2/3 F450 Rack F550 Rack S550 Rack
- Four-axis, six-axis and other multi-axis aircraft
56 Eggs Turning Tray With a PCB Turning Motor for Incubator in Pakistan
This tray will fit for Incubator and this tray will also fit for a similar type incubator. 56 Quail eggs or 56 Chicken size eggs and all sized eggs have a universal tray. Motor for Incubator automatically turning a full rotation every 2 hours or it depends upon settings of the controller in the incubator. It is made of durable material which helps to keep the egg tray clean and bacteria-free. We provide problem free incubation of your valuable eggs.
6 Volt DC Gear Motor Price in Pakistan
₨600
|
|
6V DC Gear Motor PM22GR675-316BQ Hennk Well Price in Pakistan
₨450Model : PM22GR675-316BQ
Input Voltage : 6v
6v Stall Current: ~2.50A
6v Torque: ~9.07 kg-cm
6v Speed: ~185 RPM
Shaft Diameter: 4mm diameter, D shape,
720 7mm Mini Cordless High Speed DC Motor 3.7V 45000RPM for Drone RC Quadcopter in Pakistan
₨150- 7mm is the motor diameter.
- 1 IE is Coreless DC Motor efficiency.
- 0.1A is its continuous current.
- shaft diameter is 1mm.
- Micro DC Motor is used in boat, car, electric bicycle. fan, Helicopters.
CNC 1610 2418 3018 Z Axis 775 Spindle Motor Drill Chunk Integrated Set DIY Upgrade Kit CNC Parts for Laser Engraver
Price range: ₨5,500 through ₨6,800
CNC Shield V3 Expansion Board for Arduino UNO in Pakistan
₨350CNC Shield V3 A4988 Stepper Motor Driver Expansion Board for Arduino UNO 3D
V3 Engraver Shield Expansion Board A4988 Driver for Arduino 3D Printer CNC
DRV8825 Stepper Motor Driver in Pakistan
₨560The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pin-out and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
EMAX RS2205 KV2300 Brushless DC Motor for FPV Racing Drone BLDC 1 pair in Pakistan
₨6,000Features :
- Up to 1024g thrust with 4s LiPO battery
- Cooling design reduces the motor temperature by up to 30%
- Highest Grade N52 Neodymium magnets
- Genuine Japanese NMB Bearings
- Dynamically balanced in the factory.
- 15mm Extended Prop Shaft allows virtually any prop with 5mm hole.
- 3 Locknuts and 2 sets of motor screws for 3mm and 4mm thick frames.
- High purity copper windings
Mach3 Breakout Board 5 Axis CNC in Pakistan
₨1,340- Fully support of MACH3 and other computer software support for parallel port control.
- USB power supply and peripherals powered phase separation to protect computer security.
- Peripheral wide voltage input,12-24V, and anti-reverse function.
- All of the input signals, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
- Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
- P1 as PWM outputs can be controlled with optocoupler input spindle governor.
- It can be accessed by a common cathode or common anode input level to 5V drive.
