ESP-32S NodeMCU Development Board in Pakistan

ESP32 ESP-32S NodeMCU Development Board

790.00

Description

Introduction of ESP32S NodeMCU Development Board

ESP32S NodeMCU Development Board created by Nodee MCU to evaluate the ESP-WROOM-32 module. It has an ESP32 microcontroller. It Boats Wifi, Bluetooth, Ethernet and Low Power Support all In a Single-chip.

 

Flash Layout:

ESP32 module has an internal flash organized in a single flash. And also contain pages of 4096 bytes each. The start address of the flash is 0x00000. Many areas of flash addresses are reserved for ESP32 IDF SDK and Zerynth VM. There are two different layouts based on the presence of BLE support ESP32S NodeMCU Board price is also effective.

 

Start addressSizeContent
0x00009000Size is 16KbEsp32 NVS area
0x0000D000Size is 8KbEsp32 OTA data
0x0000F000Size is 4KbEsp32 PHY data
0x00010000Size is 1MbZerynth VM
0x00110000Size is 1MbZerynth VM (FOTA)
0x00210000Size is 512KbZerynth Bytecode
0x00290000Size is 512KbZerynth Bytecode (FOTA)
0x00310000Size is 512KbFree for user storage
0x00390000Size is 448KbReserved

ESP32S NodeMCU Development Board Summary

  • Microcontroller: Tensilica 32-bit Single-/Dual-core CPU Xtensa LX6
  • Operating voltages are 3.3V
  • Input Voltage is between 7-12V
  • Digital I/O Pins (DIO) are 28
  • Analog Input Pins (ADC) is 8
  • Analog Outputs Pins (DAC) is on pin 2
  • UARTs pin on 3
  • SPIs are on 2
  • I2Cs is on 3
  • Flash Memory is: 4 MB
  • SRAM memory is: 520 KB
  • Clock Speed is: 240 Mhz
  • Wi-Fi: IEEE 802.11 b/g/n/e/i:
    • Integrated TR switch, balun, LNA, power amplifier and matching network
    • WEP or WPA/WPA2 authentication, or open networks

Description of ESP32S NodeMCU Development Board :

 

Key Features of ESP32S NodeMCU Board

240 MHz dual-core Tensilica LX6 microcontroller with 600 DMIPS
SRAM is 520 KB
Integrated 802.11BGN HT40 Wi-Fi transceiver, baseband, stack, and LWIP
( BLE ) Integrated dual-mode Bluetooth
flash is 16 MByte
operating voltages are within 2.2V to 3.6V

operating temperature is within -40°C to +125°C
On-board PCB antenna / IPEX connector for external antenna

 

Sensors

Ultra-low noise analog amplifier
Hall sensor
10x capacitive touch interface
32 kHz crystal oscillator

PWM/timer input/output available on every GPIO pin
OpenOCD debug interface with 32 kB TRAX buffer
SDIO master/slave 50 MHz
Supports external SPI flash up to 16 MB
SD-card interface support

Security Related

WEP, WPA/WPA2 PSK/Enterprise
Hardware-accelerated encryption: AES / SHA2 / Elliptical Curve Cryptography / RSA-4096

 

Description of ESP32S NodeMCU Development Board
Description of ESP32S NodeMC Development Board

 

Reviews (0)

0.0
0
0
0
0
0

Be the first to review “ESP-32S NodeMCU Development Board in Pakistan”

There are no reviews yet.