Description of 6 Channel RC Transmitter Receiver FlySky FS-I6 Transmitter with FS-IA6 Receiver
FlySky works in the frequency range of 2.405 to 2.475 GHz. This band is divided into 142 independent channels. In FlySky FS-I6 uses 16 different channels. And it also has 160 different types of hopping algorithm. Flysky radio system uses a high gain and high-quality multi-directional antenna. This remote control covers the whole frequency band. It is related to the high sensitivity receiver. It has free long-range radio transmission. Every transmitter has a unique ID. When it binding with a receiver than it saves that unique ID. It only receives the data from that unique ID. This remote stops receiving data from another transmitter signal. It dramatically increases the interference immunity and safety. Low power electronic components are installed in radio systems. Here RF modulation uses intermittent signal. and this RF modulation reducing even more power consumption.
It has 6 channels and 2.4 GHz radio with telemetry capability.
It has dual-rate, trims, gear, flap, gyro gain adjust, flight mode, throttle hold, and hover pitch switches.
It is easy to use programming and navigation buttons.
It supports Heli and it has standard wing and elevon/V-tail.
It has 20 model memory.
It consists of an 8 character model name.
It has a trainer port.
It also has a backlit LCD screen that displays real-time transmitter and receiver voltage.
It has 4 stick modes selectable
Here we have optional telemetry receivers.
It also contains sensors separately.
It has 6 channels
It contains fixed wings, glider, helicopter, and multirotor.
Its RF range is 2.405 to 2.475 GHz
Its bandwidth is 500Khz
Its band size is 142.
Its RF power is less than 20 dBm
AFHDS 2A and AFHDS have 2.4 GHz system.
Its code type is GFSK.
Its sensitivity range is 1024.
It gives low voltage warning at less than 4.2V
Its DSC port is PS2.
Its output port is PPM.
It has no charger port.
Its ANT length is 26 x 2 mm.
Its weight is 392g.
Its power is 6V 1.5AA x 4
Its size is 174 x 89 x 190 mm.
It has an online update option.
- It contains 1 three-position and 3 two-position Switches.
- it also has 2 potentiometers
- The LCD display with 128 x 64 pixels with white backlight
- it also has Port for a trainer
- it has a Fixed transmitter module
- it has 10 Tx channels
- it has 6 V (4x AA) Power supply
- it has 40.4 x 21.1 x 7.4 mm Dimensions.
- it has 6.4 g weight
- its Operating voltages are 4 – 6.5 V
- Channels are 6-10
- Output PWM, PPM, iBUS
- Antenna length is 26 mm