12V 48RPM Metal Gear Motor

12V geared motor for low-speed movement

This DC motor is listed with a 12V supply designation and a 48RPM output speed. Its metal gearbox provides a geared drive option for a compatible robotic platform, model mechanism or other low-speed application.

The listed RPM is not a guarantee of constant speed under every load. Confirm whether the supplied motor’s speed figure is specified under no-load or another test condition, and check how it behaves in the intended mechanism.

Listed details and required checks

• Nominal supply listed: 12V DC.
• Output speed listed: 48RPM.
• Gearbox: metal gearing described.
• Model marking and dimensions: confirm on the actual unit.
• Torque and current: numerical ratings not verified here.
• Shaft interface and mounting: check against the wheel or mechanism.

A general high-torque description does not establish a safe payload or continuous duty rating. Consider wheel size, gearing, friction, startup load and cooling as part of the complete design.

Power and control requirements

Choose a compatible motor driver and supply for the verified operating and startup/stall current. A microcontroller signal pin must not directly power the motor. Use appropriate wiring and protection, and keep rotating parts guarded.

An encoder, feedback controller and precision positioning system are not established as included. If the application needs a maintained speed or measured position, confirm the necessary sensing and control separately.

For a shaft connection, review the brass rigid coupler listing only after checking both bore sizes and alignment. Fit to this motor is not verified.

Frequently asked questions

Is 48RPM guaranteed under any load?

No. Confirm the specification conditions and actual load capability.

Is a controller included?

A motor driver or closed-loop controller is not established as part of this listing.