Thermistor NTC 10K Accuracy 1% Waterproof Probe

This thermistor NTC 10K probe is waterproof. it is also made of stainless steel. you can use it on 105 degrees centigrade. we can measure the environmental temperature by using it with Arduino. Get all types of sensors, modules, and probes at epro.pk.

Specifications of Thermistor NTC 10K Accuracy 1% Waterproof Probe:

• this probe is made of stainless steel and waterproof.
• its temperature measurement range is -20 to 105 degrees centigrade.
• its wire length is approximately 8 inches.
• 5 x 25 mm is the size of the probe.
• there is 2 wire output.
• we can measure environmental temperature by using Arduino ADC and this 10K NTC.
• 3380K -/ 1% is the B-constant.
• its type is NTC 10k +-1% 3950.
• its typical dissipation constant is 5mW/ degree centigrade.
• the insulation of probe is >100M ohms.
• it contains 2 seconds for peak voltage sustain time.
• the peak voltage sustain time for AC1800V 1mA is 2 seconds.
• the stress sustain is 9.8N (1kgF) for 1 minute.

Package Included:

One piece of 1-meter waterproof cable probe temperature for W1209

Related Links:

• How to use Ntc thermistor | Ntc thermistor temperature sensor working system
• Other Types of Probes