Environmental Sensors

12710 Thermoelectric Cooler Module Peltier in Pakistan 550.00

12710 Thermoelectric Cooler Module Peltier in Pakistan

0 out of 5
(0)
SKU: N/A

Specifications of Peltier:

 

It is a ceramics thermoelectric cooler module TEC-1 12710.

It can be used in the refrigerator.

It can also be used as a portable cooling car box.

It is used in liquid cooling.

It is also used in temperature stabilizer.

It is vibration-free and noise-free.

It is a solid-state.

We should use a heat sink with it.

It is a long life.

It is slim and compact.

Add to cart
Automatic Light Control Sun Switch LDR (220V 10A ) in Pakistan 320.00

Automatic Light Control Sun Switch LDR (220V 10A ) in Pakistan

5.00 out of 5
(1)
SKU: N/A

SPECIFICATIONS:

  • Product Name is Light Control Switch
  • Model No. is  AS-10-220
  • Rated Voltages are AC 220V
  • Frequency is 50/60Hz
  • Rated Current is10A
  • Fixing Hole Diameter is almost 4.9mm / 0.2″;Size : 3.3 x 4.2 x 5cm / 1.3″ x 1.7″ x 2″(L*W*H)
  • External Material is Plastic
  • Color is  White and Blue

 

Add to cart
bmp-180-pressure-sensor 230.00

BMP180 Barometric Pressure/Temperature/Altitude Sensor

0 out of 5
(0)
SKU: N/A

This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins.

Add to cart
K-Type-Thermocouple-with-MAX6675-AD-Module 440.00

DC 5V MAX6675 Module + K Type Thermocouple Temperature Sensor

0 out of 5
(0)
SKU: N/A

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input.

Add to cart
DHT11-Temperature-Humidity-Sensor 150.00

DHT11 Temperature Humidity Sensor in Pakistan

0 out of 5
(0)
SKU: N/A

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

Add to cart
dht21am2301-capacitive-digital-temperature-and-humidity-sensor-alternative-sht10-sht11-for-arduino 610.00

DHT21/AM2301 Capacitive Digital Temperature and Humidity Sensor

0 out of 5
(0)
SKU: N/A

AM2301 is a digital temperature and humidity sensor module made using a capacitive humidity sensor, a high precision temperature sensor and an 8 bit microcontroller. Former name of this sensor was DHT21.
alternative SHT10 SHT11

Add to cart
Digital Temperature & Humidity Meter HTC-1 in Pakistan 470.00

Digital Temperature & Humidity Meter HTC-1 in Pakistan

0 out of 5
(0)
SKU: N/A
  • Display temperature, humidity and time sim,ultaneously; Power Supply: 1.5V*1 (AAA size)
  • Memory of MAX & MIN measuring value;
  • 12 hour / 24 hour displaying system selectable
  • Clock & Calendar function (month and date); Desk-top placing or Wall Hanging
Add to cart
Float Level Control Switch P35 in Pakistan 260.00

Float Level Control Switch P35 in Pakistan

0 out of 5
(0)
SKU: N/A
  1. Specifications of Float Level Control Switch:

     

    • We can use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, or whatever your project may be.
    • It has down/up float switch
    • It does not contain any mercury
    • Cable Length is 30.5(cm)
    • Maximum Load is 50 W
    • Max Switching Voltages are 100V
    • Minimum Voltages are 250V DC
    • Maximum Switching Current is 0.5 A
    • Max Load Current is 1.0 A
    • Temperature Rating is -20~+80
    • We have user Manual
    • Intake System should be Install the float switch at a suitable place in vertical. When the ball falls, the switch is connected, and when the ball floats, the switch is the disconnect.
    • The drainage system should be Install the float switch at a suitable place in vertical. When the ball falls, the switch is the disconnect, and when the ball floats, the switch is connected

     

Add to cart
Gravity Analog Turbidity Sensor in Pakistan 3,500.00

Gravity Analog Turbidity Sensor in Pakistan

0 out of 5
(0)
SKU: N/A

Able to detect suspended particles in water
Both analog and digital signal output modes
Threshold is adjustable in digital signal mode
Can be used in measurement of water quality in rivers and streams

Add to cart
honeywell-humidty-sensor-HIH5030 1,400.00

Honeywell HIH-5031-001, Humidity Sensor 3-Pin

0 out of 5
(0)
SKU: N/A

-40 → +85 °C ±3%RH Analogue SMD

Read more
humidity-temperature-sensor-dht22 320.00

Humidity and Temperature Sensor DHT22

0 out of 5
(0)
SKU: N/A

Low cost with a single wire digital interface
• Calibrated and doesn’t require extra components
• Input: 3.3-6V
• Measuring current: 1-1.5mA
• Standby current: 40-50uA
• Humidity: 0-100% RH
• Temperature: -40º to 80ºC (+-0.5ºC)
• RH accuracy: +-2%

Add to cart
soil-moisture-sensor 120.00

Hygrometer Soil and Moisture Sensor Humidity Module in Pakistan

0 out of 5
(0)
SKU: N/A

The moisture sensor board features both analogue and digital outputs. The analogue output gives a variable voltage reading that allows you to estimate the moisture content of the soil (using some maths!). The digital output gives you a simple “on” or “off” when the soil moisture content is above a certain value. The value can be set or calibrated using the adjustable on board potentiometer.

Add to cart
Liquid PH Sensor and PH Electrode Probe in Pakistan 4,500.00

Liquid PH Sensor and PH Electrode Probe in Pakistan

0 out of 5
(0)
SKU: N/A

Specifications of Aquarium Hydroponic PH Electrode Probe – Liquid PH Sensor

 

  • Module Power is almost 5.00V
  • Its size is 43 x 32mm(1.69×1.26″)
  • its measuring Range is 0 – 14PH
  • its Measuring Temperature is 0 – 60 ℃
  • its accuracy is ± 0.1pH (25 ℃)
  • Response Time is ≤ 1min
  • it has pH Sensor along BNC Connector
  • its pH2.0 Interface (3-foot patch )
  • it has Gain Adjustment Potentiometer in it
  • it contains Power Indicator LED

 

Read more
DC-5V-1-Channal-1CH-Humidity-Sensor-Switch-Relay-Module-Control-Board 400.00

LM393 Indicator Light 1 Channel Digital Humidity Sensor Relay Module in Pakistan

0 out of 5
(0)
SKU: N/A

LM393 Indicator Light 1 Channel Digital Output Humidity Sensor Relay Module

Add to cart
mq5-gas-sensor 210.00

MQ-5 MQ5 LPG Gas Sensor Module In Pakistan

0 out of 5
(0)
SKU: N/AAdd to cart
MQ131 Gas Detection Sensor Module in Pakistan 3,800.00

MQ131 O3 Ozone Gas Sensor Module in Pakistan

0 out of 5
(0)
SKU: N/AAdd to cart
MQ135-Gas-Sensor-electronics-pro 230.00

MQ135 Gas Sensor for Air Qaulity in Pakistan

0 out of 5
(0)
SKU: N/AAdd to cart
MQ2 Gas Sensor Detector Module in Pakistan 210.00

MQ2 Gas Sensor Detector Module in Pakistan

0 out of 5
(0)
SKU: N/A

Specifications:

 

Its dimensions are 36 x 20 x 21 (LxWxH)

Its weight is 8gm.

Its operating voltages are plus 5V.

It can be used to detect LPG, Alcohol, Propane, Hydrogen, CO, and even methane.

Its analog output voltages are 0V to 5V.

Its digital output voltages are 0 to 5V.

Its preheat duration is 20 seconds.

This sensor can be used as a digital or analog sensor.

Its sensitivity can be varied by the potentiometer.

Add to cart
MQ-3-Alcohol-Ethanol-Sensor-Breath-Gas-Detector-Ethanol-Detection 220.00 300.00

MQ3 Alcohol Ethanol Sensor Breath Gas Detector Ethanol Detection For Arduino

0 out of 5
(0)
SKU: N/A

MQ-3 Alcohol Ethanol Sensor Breath Gas Detector Ethanol Detection For Arduino

Add to cart
MQ4 Methane Gas Sensor Module in Pakistan 200.00

MQ4 Methane Gas Sensor Module in Pakistan

0 out of 5
(0)
SKU: N/A

Features: 

  • Power Supply: 5 Volts
  • Interface Type: Analog & Digital
  • High Sensitivity to Methane & small sensitivity to smoke & alcohol
  • Low Cost.
  • Stable & Long Life.
  • On board Power indication.
Add to cart
12710 Thermoelectric Cooler Module Peltier in Pakistan

12710 Thermoelectric Cooler Module Peltier in Pakistan

0 out of 5
(0)

Specifications of Peltier:

 

It is a ceramics thermoelectric cooler module TEC-1 12710.

It can be used in the refrigerator.

It can also be used as a portable cooling car box.

It is used in liquid cooling.

It is also used in temperature stabilizer.

It is vibration-free and noise-free.

It is a solid-state.

We should use a heat sink with it.

It is a long life.

It is slim and compact.

SKU: N/A
550.00 Add to cart
Automatic Light Control Sun Switch LDR (220V 10A ) in Pakistan

Automatic Light Control Sun Switch LDR (220V 10A ) in Pakistan

5.00 out of 5
(1)

SPECIFICATIONS:

  • Product Name is Light Control Switch
  • Model No. is  AS-10-220
  • Rated Voltages are AC 220V
  • Frequency is 50/60Hz
  • Rated Current is10A
  • Fixing Hole Diameter is almost 4.9mm / 0.2″;Size : 3.3 x 4.2 x 5cm / 1.3″ x 1.7″ x 2″(L*W*H)
  • External Material is Plastic
  • Color is  White and Blue

 

SKU: N/A
Availability:

330 in stock

320.00 Add to cart
bmp-180-pressure-sensor

BMP180 Barometric Pressure/Temperature/Altitude Sensor

0 out of 5
(0)

This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins.

SKU: N/A
Availability:

34 in stock

230.00 Add to cart
K-Type-Thermocouple-with-MAX6675-AD-Module

DC 5V MAX6675 Module + K Type Thermocouple Temperature Sensor

0 out of 5
(0)

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input.

SKU: N/A
440.00 Add to cart
DHT11-Temperature-Humidity-Sensor

DHT11 Temperature Humidity Sensor in Pakistan

0 out of 5
(0)

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

SKU: N/A
150.00 Add to cart
dht21am2301-capacitive-digital-temperature-and-humidity-sensor-alternative-sht10-sht11-for-arduino

DHT21/AM2301 Capacitive Digital Temperature and Humidity Sensor

0 out of 5
(0)

AM2301 is a digital temperature and humidity sensor module made using a capacitive humidity sensor, a high precision temperature sensor and an 8 bit microcontroller. Former name of this sensor was DHT21.
alternative SHT10 SHT11

SKU: N/A
610.00 Add to cart
Digital Temperature & Humidity Meter HTC-1 in Pakistan

Digital Temperature & Humidity Meter HTC-1 in Pakistan

0 out of 5
(0)
  • Display temperature, humidity and time sim,ultaneously; Power Supply: 1.5V*1 (AAA size)
  • Memory of MAX & MIN measuring value;
  • 12 hour / 24 hour displaying system selectable
  • Clock & Calendar function (month and date); Desk-top placing or Wall Hanging
SKU: N/A
470.00 Add to cart
Float Level Control Switch P35 in Pakistan

Float Level Control Switch P35 in Pakistan

0 out of 5
(0)
  1. Specifications of Float Level Control Switch:

     

    • We can use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, or whatever your project may be.
    • It has down/up float switch
    • It does not contain any mercury
    • Cable Length is 30.5(cm)
    • Maximum Load is 50 W
    • Max Switching Voltages are 100V
    • Minimum Voltages are 250V DC
    • Maximum Switching Current is 0.5 A
    • Max Load Current is 1.0 A
    • Temperature Rating is -20~+80
    • We have user Manual
    • Intake System should be Install the float switch at a suitable place in vertical. When the ball falls, the switch is connected, and when the ball floats, the switch is the disconnect.
    • The drainage system should be Install the float switch at a suitable place in vertical. When the ball falls, the switch is the disconnect, and when the ball floats, the switch is connected

     

SKU: N/A
260.00 Add to cart
Gravity Analog Turbidity Sensor in Pakistan

Gravity Analog Turbidity Sensor in Pakistan

0 out of 5
(0)

Able to detect suspended particles in water
Both analog and digital signal output modes
Threshold is adjustable in digital signal mode
Can be used in measurement of water quality in rivers and streams

SKU: N/A
3,500.00 Add to cart
honeywell-humidty-sensor-HIH5030

Honeywell HIH-5031-001, Humidity Sensor 3-Pin

0 out of 5
(0)

-40 → +85 °C ±3%RH Analogue SMD

SKU: N/A
Availability:

Out of stock

1,400.00 Read more
humidity-temperature-sensor-dht22

Humidity and Temperature Sensor DHT22

0 out of 5
(0)

Low cost with a single wire digital interface
• Calibrated and doesn’t require extra components
• Input: 3.3-6V
• Measuring current: 1-1.5mA
• Standby current: 40-50uA
• Humidity: 0-100% RH
• Temperature: -40º to 80ºC (+-0.5ºC)
• RH accuracy: +-2%

SKU: N/A
320.00 Add to cart
soil-moisture-sensor

Hygrometer Soil and Moisture Sensor Humidity Module in Pakistan

0 out of 5
(0)

The moisture sensor board features both analogue and digital outputs. The analogue output gives a variable voltage reading that allows you to estimate the moisture content of the soil (using some maths!). The digital output gives you a simple “on” or “off” when the soil moisture content is above a certain value. The value can be set or calibrated using the adjustable on board potentiometer.

SKU: N/A
120.00 Add to cart
Liquid PH Sensor and PH Electrode Probe in Pakistan

Liquid PH Sensor and PH Electrode Probe in Pakistan

0 out of 5
(0)

Specifications of Aquarium Hydroponic PH Electrode Probe – Liquid PH Sensor

 

  • Module Power is almost 5.00V
  • Its size is 43 x 32mm(1.69×1.26″)
  • its measuring Range is 0 – 14PH
  • its Measuring Temperature is 0 – 60 ℃
  • its accuracy is ± 0.1pH (25 ℃)
  • Response Time is ≤ 1min
  • it has pH Sensor along BNC Connector
  • its pH2.0 Interface (3-foot patch )
  • it has Gain Adjustment Potentiometer in it
  • it contains Power Indicator LED

 

SKU: N/A
Availability:

Out of stock

4,500.00 Read more
DC-5V-1-Channal-1CH-Humidity-Sensor-Switch-Relay-Module-Control-Board

LM393 Indicator Light 1 Channel Digital Humidity Sensor Relay Module in Pakistan

0 out of 5
(0)

LM393 Indicator Light 1 Channel Digital Output Humidity Sensor Relay Module

SKU: N/A
400.00 Add to cart
MQ131 Gas Detection Sensor Module in Pakistan
Availability:

3 in stock (can be backordered)

3,800.00 Add to cart
MQ2 Gas Sensor Detector Module in Pakistan

MQ2 Gas Sensor Detector Module in Pakistan

0 out of 5
(0)

Specifications:

 

Its dimensions are 36 x 20 x 21 (LxWxH)

Its weight is 8gm.

Its operating voltages are plus 5V.

It can be used to detect LPG, Alcohol, Propane, Hydrogen, CO, and even methane.

Its analog output voltages are 0V to 5V.

Its digital output voltages are 0 to 5V.

Its preheat duration is 20 seconds.

This sensor can be used as a digital or analog sensor.

Its sensitivity can be varied by the potentiometer.

SKU: N/A
Availability:

4 in stock

210.00 Add to cart
MQ-3-Alcohol-Ethanol-Sensor-Breath-Gas-Detector-Ethanol-Detection

MQ3 Alcohol Ethanol Sensor Breath Gas Detector Ethanol Detection For Arduino

0 out of 5
(0)

MQ-3 Alcohol Ethanol Sensor Breath Gas Detector Ethanol Detection For Arduino

SKU: N/A
Availability:

50 in stock

220.00 300.00 Add to cart
MQ4 Methane Gas Sensor Module in Pakistan

MQ4 Methane Gas Sensor Module in Pakistan

0 out of 5
(0)

Features: 

  • Power Supply: 5 Volts
  • Interface Type: Analog & Digital
  • High Sensitivity to Methane & small sensitivity to smoke & alcohol
  • Low Cost.
  • Stable & Long Life.
  • On board Power indication.
SKU: N/A
200.00 Add to cart
12710 Thermoelectric Cooler Module Peltier in Pakistan

12710 Thermoelectric Cooler Module Peltier in Pakistan

0 out of 5
(0)

Specifications of Peltier:

 

It is a ceramics thermoelectric cooler module TEC-1 12710.

It can be used in the refrigerator.

It can also be used as a portable cooling car box.

It is used in liquid cooling.

It is also used in temperature stabilizer.

It is vibration-free and noise-free.

It is a solid-state.

We should use a heat sink with it.

It is a long life.

It is slim and compact.

550.00 Add to cart
Automatic Light Control Sun Switch LDR (220V 10A ) in Pakistan

Automatic Light Control Sun Switch LDR (220V 10A ) in Pakistan

5.00 out of 5
(1)

SPECIFICATIONS:

  • Product Name is Light Control Switch
  • Model No. is  AS-10-220
  • Rated Voltages are AC 220V
  • Frequency is 50/60Hz
  • Rated Current is10A
  • Fixing Hole Diameter is almost 4.9mm / 0.2″;Size : 3.3 x 4.2 x 5cm / 1.3″ x 1.7″ x 2″(L*W*H)
  • External Material is Plastic
  • Color is  White and Blue

 

Availability:

330 in stock

320.00 Add to cart
bmp-180-pressure-sensor

BMP180 Barometric Pressure/Temperature/Altitude Sensor

0 out of 5
(0)

This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins.

Availability:

34 in stock

230.00 Add to cart
K-Type-Thermocouple-with-MAX6675-AD-Module

DC 5V MAX6675 Module + K Type Thermocouple Temperature Sensor

0 out of 5
(0)

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input.

440.00 Add to cart
DHT11-Temperature-Humidity-Sensor

DHT11 Temperature Humidity Sensor in Pakistan

0 out of 5
(0)

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

150.00 Add to cart
dht21am2301-capacitive-digital-temperature-and-humidity-sensor-alternative-sht10-sht11-for-arduino

DHT21/AM2301 Capacitive Digital Temperature and Humidity Sensor

0 out of 5
(0)

AM2301 is a digital temperature and humidity sensor module made using a capacitive humidity sensor, a high precision temperature sensor and an 8 bit microcontroller. Former name of this sensor was DHT21.
alternative SHT10 SHT11

610.00 Add to cart
Digital Temperature & Humidity Meter HTC-1 in Pakistan

Digital Temperature & Humidity Meter HTC-1 in Pakistan

0 out of 5
(0)
  • Display temperature, humidity and time sim,ultaneously; Power Supply: 1.5V*1 (AAA size)
  • Memory of MAX & MIN measuring value;
  • 12 hour / 24 hour displaying system selectable
  • Clock & Calendar function (month and date); Desk-top placing or Wall Hanging
470.00 Add to cart
Float Level Control Switch P35 in Pakistan

Float Level Control Switch P35 in Pakistan

0 out of 5
(0)
  1. Specifications of Float Level Control Switch:

     

    • We can use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, or whatever your project may be.
    • It has down/up float switch
    • It does not contain any mercury
    • Cable Length is 30.5(cm)
    • Maximum Load is 50 W
    • Max Switching Voltages are 100V
    • Minimum Voltages are 250V DC
    • Maximum Switching Current is 0.5 A
    • Max Load Current is 1.0 A
    • Temperature Rating is -20~+80
    • We have user Manual
    • Intake System should be Install the float switch at a suitable place in vertical. When the ball falls, the switch is connected, and when the ball floats, the switch is the disconnect.
    • The drainage system should be Install the float switch at a suitable place in vertical. When the ball falls, the switch is the disconnect, and when the ball floats, the switch is connected

     

260.00 Add to cart
Gravity Analog Turbidity Sensor in Pakistan

Gravity Analog Turbidity Sensor in Pakistan

0 out of 5
(0)

Able to detect suspended particles in water
Both analog and digital signal output modes
Threshold is adjustable in digital signal mode
Can be used in measurement of water quality in rivers and streams

3,500.00 Add to cart
honeywell-humidty-sensor-HIH5030
Availability:

Out of stock

1,400.00 Read more
humidity-temperature-sensor-dht22

Humidity and Temperature Sensor DHT22

0 out of 5
(0)

Low cost with a single wire digital interface
• Calibrated and doesn’t require extra components
• Input: 3.3-6V
• Measuring current: 1-1.5mA
• Standby current: 40-50uA
• Humidity: 0-100% RH
• Temperature: -40º to 80ºC (+-0.5ºC)
• RH accuracy: +-2%

320.00 Add to cart
soil-moisture-sensor

Hygrometer Soil and Moisture Sensor Humidity Module in Pakistan

0 out of 5
(0)

The moisture sensor board features both analogue and digital outputs. The analogue output gives a variable voltage reading that allows you to estimate the moisture content of the soil (using some maths!). The digital output gives you a simple “on” or “off” when the soil moisture content is above a certain value. The value can be set or calibrated using the adjustable on board potentiometer.

120.00 Add to cart
Liquid PH Sensor and PH Electrode Probe in Pakistan

Liquid PH Sensor and PH Electrode Probe in Pakistan

0 out of 5
(0)

Specifications of Aquarium Hydroponic PH Electrode Probe – Liquid PH Sensor

 

  • Module Power is almost 5.00V
  • Its size is 43 x 32mm(1.69×1.26″)
  • its measuring Range is 0 – 14PH
  • its Measuring Temperature is 0 – 60 ℃
  • its accuracy is ± 0.1pH (25 ℃)
  • Response Time is ≤ 1min
  • it has pH Sensor along BNC Connector
  • its pH2.0 Interface (3-foot patch )
  • it has Gain Adjustment Potentiometer in it
  • it contains Power Indicator LED

 

Availability:

Out of stock

4,500.00 Read more
DC-5V-1-Channal-1CH-Humidity-Sensor-Switch-Relay-Module-Control-Board

LM393 Indicator Light 1 Channel Digital Humidity Sensor Relay Module in Pakistan

0 out of 5
(0)

LM393 Indicator Light 1 Channel Digital Output Humidity Sensor Relay Module

400.00 Add to cart
MQ131 Gas Detection Sensor Module in Pakistan
Availability:

3 in stock (can be backordered)

3,800.00 Add to cart
MQ2 Gas Sensor Detector Module in Pakistan

MQ2 Gas Sensor Detector Module in Pakistan

0 out of 5
(0)

Specifications:

 

Its dimensions are 36 x 20 x 21 (LxWxH)

Its weight is 8gm.

Its operating voltages are plus 5V.

It can be used to detect LPG, Alcohol, Propane, Hydrogen, CO, and even methane.

Its analog output voltages are 0V to 5V.

Its digital output voltages are 0 to 5V.

Its preheat duration is 20 seconds.

This sensor can be used as a digital or analog sensor.

Its sensitivity can be varied by the potentiometer.

Availability:

4 in stock

210.00 Add to cart
MQ-3-Alcohol-Ethanol-Sensor-Breath-Gas-Detector-Ethanol-Detection

MQ3 Alcohol Ethanol Sensor Breath Gas Detector Ethanol Detection For Arduino

0 out of 5
(0)

MQ-3 Alcohol Ethanol Sensor Breath Gas Detector Ethanol Detection For Arduino

Availability:

50 in stock

220.00 300.00 Add to cart
MQ4 Methane Gas Sensor Module in Pakistan

MQ4 Methane Gas Sensor Module in Pakistan

0 out of 5
(0)

Features: 

  • Power Supply: 5 Volts
  • Interface Type: Analog & Digital
  • High Sensitivity to Methane & small sensitivity to smoke & alcohol
  • Low Cost.
  • Stable & Long Life.
  • On board Power indication.
200.00 Add to cart
12710 Thermoelectric Cooler Module Peltier in Pakistan

12710 Thermoelectric Cooler Module Peltier in Pakistan

0 out of 5
(0)

Specifications of Peltier:

 

It is a ceramics thermoelectric cooler module TEC-1 12710.

It can be used in the refrigerator.

It can also be used as a portable cooling car box.

It is used in liquid cooling.

It is also used in temperature stabilizer.

It is vibration-free and noise-free.

It is a solid-state.

We should use a heat sink with it.

It is a long life.

It is slim and compact.

550.00 Add to cart
Automatic Light Control Sun Switch LDR (220V 10A ) in Pakistan

Automatic Light Control Sun Switch LDR (220V 10A ) in Pakistan

5.00 out of 5
(1)

SPECIFICATIONS:

  • Product Name is Light Control Switch
  • Model No. is  AS-10-220
  • Rated Voltages are AC 220V
  • Frequency is 50/60Hz
  • Rated Current is10A
  • Fixing Hole Diameter is almost 4.9mm / 0.2″;Size : 3.3 x 4.2 x 5cm / 1.3″ x 1.7″ x 2″(L*W*H)
  • External Material is Plastic
  • Color is  White and Blue

 

320.00 Add to cart
bmp-180-pressure-sensor

BMP180 Barometric Pressure/Temperature/Altitude Sensor

0 out of 5
(0)

This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins.

230.00 Add to cart
K-Type-Thermocouple-with-MAX6675-AD-Module

DC 5V MAX6675 Module + K Type Thermocouple Temperature Sensor

0 out of 5
(0)

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input.

440.00 Add to cart
DHT11-Temperature-Humidity-Sensor

DHT11 Temperature Humidity Sensor in Pakistan

0 out of 5
(0)

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.

150.00 Add to cart
dht21am2301-capacitive-digital-temperature-and-humidity-sensor-alternative-sht10-sht11-for-arduino

DHT21/AM2301 Capacitive Digital Temperature and Humidity Sensor

0 out of 5
(0)

AM2301 is a digital temperature and humidity sensor module made using a capacitive humidity sensor, a high precision temperature sensor and an 8 bit microcontroller. Former name of this sensor was DHT21.
alternative SHT10 SHT11

610.00 Add to cart
Digital Temperature & Humidity Meter HTC-1 in Pakistan

Digital Temperature & Humidity Meter HTC-1 in Pakistan

0 out of 5
(0)
  • Display temperature, humidity and time sim,ultaneously; Power Supply: 1.5V*1 (AAA size)
  • Memory of MAX & MIN measuring value;
  • 12 hour / 24 hour displaying system selectable
  • Clock & Calendar function (month and date); Desk-top placing or Wall Hanging
470.00 Add to cart
Float Level Control Switch P35 in Pakistan

Float Level Control Switch P35 in Pakistan

0 out of 5
(0)
  1. Specifications of Float Level Control Switch:

     

    • We can use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, or whatever your project may be.
    • It has down/up float switch
    • It does not contain any mercury
    • Cable Length is 30.5(cm)
    • Maximum Load is 50 W
    • Max Switching Voltages are 100V
    • Minimum Voltages are 250V DC
    • Maximum Switching Current is 0.5 A
    • Max Load Current is 1.0 A
    • Temperature Rating is -20~+80
    • We have user Manual
    • Intake System should be Install the float switch at a suitable place in vertical. When the ball falls, the switch is connected, and when the ball floats, the switch is the disconnect.
    • The drainage system should be Install the float switch at a suitable place in vertical. When the ball falls, the switch is the disconnect, and when the ball floats, the switch is connected

     

260.00 Add to cart
Gravity Analog Turbidity Sensor in Pakistan

Gravity Analog Turbidity Sensor in Pakistan

0 out of 5
(0)

Able to detect suspended particles in water
Both analog and digital signal output modes
Threshold is adjustable in digital signal mode
Can be used in measurement of water quality in rivers and streams

3,500.00 Add to cart
honeywell-humidty-sensor-HIH5030
1,400.00 Read more
humidity-temperature-sensor-dht22

Humidity and Temperature Sensor DHT22

0 out of 5
(0)

Low cost with a single wire digital interface
• Calibrated and doesn’t require extra components
• Input: 3.3-6V
• Measuring current: 1-1.5mA
• Standby current: 40-50uA
• Humidity: 0-100% RH
• Temperature: -40º to 80ºC (+-0.5ºC)
• RH accuracy: +-2%

320.00 Add to cart
soil-moisture-sensor

Hygrometer Soil and Moisture Sensor Humidity Module in Pakistan

0 out of 5
(0)

The moisture sensor board features both analogue and digital outputs. The analogue output gives a variable voltage reading that allows you to estimate the moisture content of the soil (using some maths!). The digital output gives you a simple “on” or “off” when the soil moisture content is above a certain value. The value can be set or calibrated using the adjustable on board potentiometer.

120.00 Add to cart
Liquid PH Sensor and PH Electrode Probe in Pakistan

Liquid PH Sensor and PH Electrode Probe in Pakistan

0 out of 5
(0)

Specifications of Aquarium Hydroponic PH Electrode Probe – Liquid PH Sensor

 

  • Module Power is almost 5.00V
  • Its size is 43 x 32mm(1.69×1.26″)
  • its measuring Range is 0 – 14PH
  • its Measuring Temperature is 0 – 60 ℃
  • its accuracy is ± 0.1pH (25 ℃)
  • Response Time is ≤ 1min
  • it has pH Sensor along BNC Connector
  • its pH2.0 Interface (3-foot patch )
  • it has Gain Adjustment Potentiometer in it
  • it contains Power Indicator LED

 

4,500.00 Read more
DC-5V-1-Channal-1CH-Humidity-Sensor-Switch-Relay-Module-Control-Board

LM393 Indicator Light 1 Channel Digital Humidity Sensor Relay Module in Pakistan

0 out of 5
(0)

LM393 Indicator Light 1 Channel Digital Output Humidity Sensor Relay Module

400.00 Add to cart
MQ2 Gas Sensor Detector Module in Pakistan

MQ2 Gas Sensor Detector Module in Pakistan

0 out of 5
(0)

Specifications:

 

Its dimensions are 36 x 20 x 21 (LxWxH)

Its weight is 8gm.

Its operating voltages are plus 5V.

It can be used to detect LPG, Alcohol, Propane, Hydrogen, CO, and even methane.

Its analog output voltages are 0V to 5V.

Its digital output voltages are 0 to 5V.

Its preheat duration is 20 seconds.

This sensor can be used as a digital or analog sensor.

Its sensitivity can be varied by the potentiometer.

210.00 Add to cart
MQ-3-Alcohol-Ethanol-Sensor-Breath-Gas-Detector-Ethanol-Detection

MQ3 Alcohol Ethanol Sensor Breath Gas Detector Ethanol Detection For Arduino

0 out of 5
(0)

MQ-3 Alcohol Ethanol Sensor Breath Gas Detector Ethanol Detection For Arduino

220.00 300.00 Add to cart
MQ4 Methane Gas Sensor Module in Pakistan

MQ4 Methane Gas Sensor Module in Pakistan

0 out of 5
(0)

Features: 

  • Power Supply: 5 Volts
  • Interface Type: Analog & Digital
  • High Sensitivity to Methane & small sensitivity to smoke & alcohol
  • Low Cost.
  • Stable & Long Life.
  • On board Power indication.
200.00 Add to cart

Showing 1–20 of 27 results