12710 Thermoelectric Cooler Module Peltier in Pakistan
₨560Specifications of Peltier:
It is a ceramics thermoelectric cooler module TEC-1 12710.
It can be used in the refrigerator.
It can also be used as a portable cooling car box.
It is used in liquid cooling.
It is also used in temperature stabilizer.
It is vibration-free and noise-free.
It is a solid-state.
We should use a heat sink with it.
It is a long life.
It is slim and compact.
AM2302 Temperature and Humidity Sensor (Wired DHT22) in Pakistan
₨930- AM2302 (Wired DHT22) Temperature and Humidity Sensor operating voltage 3 to 5 volts DC.
- Its maximum current consumption is approximately 2.5mA during a data request.
- The user is able to get new data once every 2 seconds.
- it provides output as a digital single bus.
- Its air humidity measuring range is 0 to 100%.
- 0 to 80 degrees centigrade is its temperature measuring range.
- Its air humidity tolerance range is 2 to 5%.
Arduino BMP180 Barometric Pressure Sensor Module in Pakistan
₨210- It contains the I2C interface.
- its maximum I2C speed is 3.5Mhz.
- this sensor consists of very low noise which is up to 0.02 hPa or 17cm.
- Its size is 13 x 10 mm.
- Analog devises BMP180 Barometric Sensor for Electronics low-power consumption is -0.5 microamps at 1Hz.
- its pressure range is 300 hPa to 1100 hPa or (9000m to -500m).
Automatic Light Control Sun Switch LDR (220V 10A) in Pakistan
Original price was: ₨320.₨310Current price is: ₨310.SPECIFICATIONS:
- Product Name is Light Control Switch
- Model No. is AS-10-220
- Rated Voltages are AC 220V
- Frequency is 50/60Hz
- Rated Current is10A
- Fixing Hole Diameter is almost 4.9mm / 0.2″;Size : 3.3 x 4.2 x 5cm / 1.3″ x 1.7″ x 2″(L*W*H)
- External Material is Plastic
- Color is White and Blue
DC 5V MAX6675 Module + K Type Thermocouple Temperature Sensor
₨750Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input.
DHT11 Temperature Humidity Sensor in Pakistan
₨250The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old.
DHT21/AM2301 Capacitive Digital Temperature and Humidity Sensor
₨930AM2301 is a digital temperature and humidity sensor module made using a capacitive humidity sensor, a high precision temperature sensor and an 8 bit microcontroller. Former name of this sensor was DHT21.
alternative SHT10 SHT11
Digital Temperature & Humidity Meter HTC-1 in Pakistan
₨500- Display temperature, humidity and time sim,ultaneously; Power Supply: 1.5V*1 (AAA size)
- Memory of MAX & MIN measuring value;
- 12 hour / 24 hour displaying system selectable
- Clock & Calendar function (month and date); Desk-top placing or Wall Hanging
Gravity Analog Turbidity Sensor in Pakistan
₨2,200- Its operating voltages are 5V DC.
- Its maximum operating current is 40mA.
- Its response time is <500ms.
- Its insulation resistance is 100M (Min).
- Its analog output is almost 0 to 4.5V.
Humidity and Temperature Sensor DHT22
₨740Low cost with a single wire digital interface
• Calibrated and doesn’t require extra components
• Input: 3.3-6V
• Measuring current: 1-1.5mA
• Standby current: 40-50uA
• Humidity: 0-100% RH
• Temperature: -40º to 80ºC (+-0.5ºC)
• RH accuracy: +-2%
Hygrometer Soil and Moisture Sensor Humidity Module in Pakistan
₨170The moisture sensor board features both analogue and digital outputs. The analogue output gives a variable voltage reading that allows you to estimate the moisture content of the soil (using some maths!). The digital output gives you a simple “on” or “off” when the soil moisture content is above a certain value. The value can be set or calibrated using the adjustable on board potentiometer.
KY024 Linear Magnetic Hall Effect Sensor in Pakistan
₨140
Level FloatControl Switch P35 in Pakistan
₨380-
Specifications of Float Level Control Switch:
- We can use them with hydroponics, saltwater tank, freshwater tank, gardening, aquariums for power head control, pet bowls, fish tanks, filtration, heating, or whatever your project may be.
- It has down/up float switch
- It does not contain any mercury
- Cable Length is 30.5(cm)
- Maximum Load is 50 W
- Max Switching Voltages are 100V
- Minimum Voltages are 250V DC
- Maximum Switching Current is 0.5 A
- Max Load Current is 1.0 A
- Temperature Rating is -20~+80
- We have user Manual
- Intake System should be Install the float switch at a suitable place in vertical. When the ball falls, the switch is connected, and when the ball floats, the switch is the disconnect.
- The drainage system should be Install the float switch at a suitable place in vertical. When the ball falls, the switch is the disconnect, and when the ball floats, the switch is connected
LM393 Indicator Light 1 Channel Digital Humidity Sensor Relay Module in Pakistan
₨400LM393 Indicator Light 1 Channel Digital Output Humidity Sensor Relay Module