Relay Modules

16 Channel 5V Relay Module in Pakistan 1,350.00 1,500.00

16 Channel 5V Relay Module in Pakistan

0 out of 5
(0)
SKU: N/AAdd to cart
two-channel-relay-module 180.00

2 Channel Relay Module 5V in Pakistan

0 out of 5
(0)
SKU: N/A

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
It has a 1×3 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the relay. The pins are marked on the PCB:

Add to cart
wifi-with-4-channel-relay-epro

4 Channel Relay Board ESP-01 WIFI Module for Smart Home Intelligent Furniture 4 Channel WIFI Relay Module in Pakistan

0 out of 5
(0)
SKU: N/ARead more
4-channel-relay-module 280.00

4 Channel Relay Module – Board 5V in Pakistan

0 out of 5
(0)
SKU: N/AAdd to cart
4 Channel Solid State Relay Module in Pakistan 690.00

4 Channel Solid State Relay Module in Pakistan

0 out of 5
(0)
SKU: N/A

4 Channel Solid State Relay Module

Add to cart
12v-relay 40.00

5 Pin 12VDC DC 12V Coil Relay in Pakistan

0 out of 5
(0)
SKU: N/AAdd to cart
1-channel-ssr-electronics-pro 190.00

5V 1 Channel OMRON SSR G3MB-202P Solid State Relay Module For Arduino

0 out of 5
(0)
SKU: N/A
  • (0-2.5V state low relay OFF)
  • (3.3-5V state high relay ON)
  • Module interface:
  • Input section:
  • DC +: positive power supply (by relay voltage power supply)
  • DC-: connect power negative
  • CH: Relay module signal to trigger the end (high level trigger effective)
Add to cart
6 Channel Relay Module 5V in Pakistan 600.00

6 Channel Relay Module 5V in Pakistan

0 out of 5
(0)
SKU: N/A

Features of Relay Module Board:

 

It is double-sided compacted PCB and it is also high quality.

It has Opto-Isolated inputs. And optoisolated inputs mean digital electronics are safe and noise-free.

This 6 relay module board is active low 5V.

This board consists of 6 relays, and this board can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.

These relays are used to control various appliances and other equipment with large current.

Its maximum output contact is AC 250V, 10A, and DC 30V 10A.

Its standard interface can be directly connected with the microcontrollers.

There are red working status indicator lights and it shows the safe use of the conductive.

It is widely used for all MCU control.

It is also used in the industrial sector, PLC control, smart home control.

Add to cart
8-channel-relay-module 500.00 550.00

8 Channel Relay Module 5V – Board in Pakistan

0 out of 5
(0)
SKU: N/A

Eight Channel Relay Module

Add to cart
Omron-DPDT-Non-Latching-Relay-PCB-Mount-12V-dc-Coil-2A 100.00

Omron DPDT Non-Latching Relay PCB Mount, 12V dc Coil, 2 A

0 out of 5
(0)
SKU: N/A
G6A Series DPCO
  • Fully sealed
  • Low magnetic leakage
  • Impulse withstand voltage of 1500V
  • Ideal for telecommunications equipment
Add to cart
Single-Channel-Relay-Module-10A 80.00

One Channel Relay Module in Pakistan

0 out of 5
(0)
SKU: N/A

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
It has a 1×3 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the relay. The pins are marked on the PCB:

Add to cart
SPDT T90 L TYEPE RELAY 12v 30 Amp in Pakistan 80.00

SPDT T90 L TYEPE RELAY 12v 30 Amp in Pakistan

0 out of 5
(0)
SKU: N/A
  • SPDT Relay
  • Rated up to 220VAC @ 20A
  • Fully Sealed
Add to cart
two-channel-relay-module

2 Channel Relay Module 5V in Pakistan

0 out of 5
(0)

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
It has a 1×3 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the relay. The pins are marked on the PCB:

SKU: N/A
180.00 Add to cart
4 Channel Solid State Relay Module in Pakistan

4 Channel Solid State Relay Module in Pakistan

0 out of 5
(0)

4 Channel Solid State Relay Module

SKU: N/A
690.00 Add to cart
1-channel-ssr-electronics-pro

5V 1 Channel OMRON SSR G3MB-202P Solid State Relay Module For Arduino

0 out of 5
(0)
  • (0-2.5V state low relay OFF)
  • (3.3-5V state high relay ON)
  • Module interface:
  • Input section:
  • DC +: positive power supply (by relay voltage power supply)
  • DC-: connect power negative
  • CH: Relay module signal to trigger the end (high level trigger effective)
SKU: N/A
190.00 Add to cart
6 Channel Relay Module 5V in Pakistan

6 Channel Relay Module 5V in Pakistan

0 out of 5
(0)

Features of Relay Module Board:

 

It is double-sided compacted PCB and it is also high quality.

It has Opto-Isolated inputs. And optoisolated inputs mean digital electronics are safe and noise-free.

This 6 relay module board is active low 5V.

This board consists of 6 relays, and this board can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.

These relays are used to control various appliances and other equipment with large current.

Its maximum output contact is AC 250V, 10A, and DC 30V 10A.

Its standard interface can be directly connected with the microcontrollers.

There are red working status indicator lights and it shows the safe use of the conductive.

It is widely used for all MCU control.

It is also used in the industrial sector, PLC control, smart home control.

SKU: N/A
600.00 Add to cart
8-channel-relay-module
500.00 550.00 Add to cart
Omron-DPDT-Non-Latching-Relay-PCB-Mount-12V-dc-Coil-2A

Omron DPDT Non-Latching Relay PCB Mount, 12V dc Coil, 2 A

0 out of 5
(0)
G6A Series DPCO
  • Fully sealed
  • Low magnetic leakage
  • Impulse withstand voltage of 1500V
  • Ideal for telecommunications equipment
SKU: N/A
100.00 Add to cart
Single-Channel-Relay-Module-10A

One Channel Relay Module in Pakistan

0 out of 5
(0)

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
It has a 1×3 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the relay. The pins are marked on the PCB:

SKU: N/A
80.00 Add to cart
SPDT T90 L TYEPE RELAY 12v 30 Amp in Pakistan

SPDT T90 L TYEPE RELAY 12v 30 Amp in Pakistan

0 out of 5
(0)
  • SPDT Relay
  • Rated up to 220VAC @ 20A
  • Fully Sealed
SKU: N/A
80.00 Add to cart
two-channel-relay-module

2 Channel Relay Module 5V in Pakistan

0 out of 5
(0)

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
It has a 1×3 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the relay. The pins are marked on the PCB:

180.00 Add to cart
1-channel-ssr-electronics-pro

5V 1 Channel OMRON SSR G3MB-202P Solid State Relay Module For Arduino

0 out of 5
(0)
  • (0-2.5V state low relay OFF)
  • (3.3-5V state high relay ON)
  • Module interface:
  • Input section:
  • DC +: positive power supply (by relay voltage power supply)
  • DC-: connect power negative
  • CH: Relay module signal to trigger the end (high level trigger effective)
190.00 Add to cart
6 Channel Relay Module 5V in Pakistan

6 Channel Relay Module 5V in Pakistan

0 out of 5
(0)

Features of Relay Module Board:

 

It is double-sided compacted PCB and it is also high quality.

It has Opto-Isolated inputs. And optoisolated inputs mean digital electronics are safe and noise-free.

This 6 relay module board is active low 5V.

This board consists of 6 relays, and this board can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.

These relays are used to control various appliances and other equipment with large current.

Its maximum output contact is AC 250V, 10A, and DC 30V 10A.

Its standard interface can be directly connected with the microcontrollers.

There are red working status indicator lights and it shows the safe use of the conductive.

It is widely used for all MCU control.

It is also used in the industrial sector, PLC control, smart home control.

600.00 Add to cart
Omron-DPDT-Non-Latching-Relay-PCB-Mount-12V-dc-Coil-2A

Omron DPDT Non-Latching Relay PCB Mount, 12V dc Coil, 2 A

0 out of 5
(0)
G6A Series DPCO
  • Fully sealed
  • Low magnetic leakage
  • Impulse withstand voltage of 1500V
  • Ideal for telecommunications equipment
100.00 Add to cart
Single-Channel-Relay-Module-10A

One Channel Relay Module in Pakistan

0 out of 5
(0)

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
It has a 1×3 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the relay. The pins are marked on the PCB:

80.00 Add to cart
SPDT T90 L TYEPE RELAY 12v 30 Amp in Pakistan

SPDT T90 L TYEPE RELAY 12v 30 Amp in Pakistan

0 out of 5
(0)
  • SPDT Relay
  • Rated up to 220VAC @ 20A
  • Fully Sealed
80.00 Add to cart
two-channel-relay-module

2 Channel Relay Module 5V in Pakistan

0 out of 5
(0)

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
It has a 1×3 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the relay. The pins are marked on the PCB:

180.00 Add to cart
1-channel-ssr-electronics-pro

5V 1 Channel OMRON SSR G3MB-202P Solid State Relay Module For Arduino

0 out of 5
(0)
  • (0-2.5V state low relay OFF)
  • (3.3-5V state high relay ON)
  • Module interface:
  • Input section:
  • DC +: positive power supply (by relay voltage power supply)
  • DC-: connect power negative
  • CH: Relay module signal to trigger the end (high level trigger effective)
190.00 Add to cart
6 Channel Relay Module 5V in Pakistan

6 Channel Relay Module 5V in Pakistan

0 out of 5
(0)

Features of Relay Module Board:

 

It is double-sided compacted PCB and it is also high quality.

It has Opto-Isolated inputs. And optoisolated inputs mean digital electronics are safe and noise-free.

This 6 relay module board is active low 5V.

This board consists of 6 relays, and this board can be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, PLC, etc.

These relays are used to control various appliances and other equipment with large current.

Its maximum output contact is AC 250V, 10A, and DC 30V 10A.

Its standard interface can be directly connected with the microcontrollers.

There are red working status indicator lights and it shows the safe use of the conductive.

It is widely used for all MCU control.

It is also used in the industrial sector, PLC control, smart home control.

600.00 Add to cart
Omron-DPDT-Non-Latching-Relay-PCB-Mount-12V-dc-Coil-2A

Omron DPDT Non-Latching Relay PCB Mount, 12V dc Coil, 2 A

0 out of 5
(0)
G6A Series DPCO
  • Fully sealed
  • Low magnetic leakage
  • Impulse withstand voltage of 1500V
  • Ideal for telecommunications equipment
100.00 Add to cart
Single-Channel-Relay-Module-10A

One Channel Relay Module in Pakistan

0 out of 5
(0)

This is a 5V, 10A 2-Channel Relay interface board. It can be used to control various appliances, and other equipments with large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
It has a 1×3 (2.54mm pitch) pin header for connecting power (5V and 0V), and for controlling the relay. The pins are marked on the PCB:

80.00 Add to cart
SPDT T90 L TYEPE RELAY 12v 30 Amp in Pakistan

SPDT T90 L TYEPE RELAY 12v 30 Amp in Pakistan

0 out of 5
(0)
  • SPDT Relay
  • Rated up to 220VAC @ 20A
  • Fully Sealed
80.00 Add to cart

Showing all 12 results