No products in the cart.
₨1,600.0010V-60V DC Motor Speed Regulation Module PWM Controller 20A Motor Driver in Pakistan
SKU: N/A- 10V-60V DC Motor Speed Regulation Module PWM Controller 20A Motor Driver
- Output voltage: Linear loading
- Input voltage: DC10-60V
- Output current: 0-20A
- Continuous current: 1200W
₨220.0028YBJ-48 DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Drive in Pakistan
SKU: N/Adc-5v-4-phase-5-wire-stepper-motor-with-uln200
₨230.00A3967 Stepper Motor Easy Driver Board in Pakistan
SKU: N/AEasyDriver Shield Stepper Motor Driver A3967
₨130.00A4988 Stepper Motor Driver in Pakistan
SKU: N/A- its supply voltage is 8 to 35V DC.
- it has 1A current without a heatsink.
- it gives 2 A current with the heat sink.
- 3 to 5.5V is logical input.
₨170.00DRV8825 Stepper Motor Driver in Pakistan
SKU: N/AThe DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pin-out and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
₨75.00L293D H Bridge Motor Driver in Pakistan
SKU: N/AL293D H-Bridge Stepper Motor Driver
₨270.00L293D Motor Driver Shield in Pakistan
SKU: N/A- It is multi-function and easy to operate.
- It has powerful drive library support and feature updates.
- It supports 4-channel DC motor Drives, stepper motor, or 2 while driving two servos.
- We can connect 2 connections for 5V servos connected to the Arduino’s high-resolution dedication timer.
- H-bridge motor driver chipset provides 0.6A per bridge and peaks current is 1.2A with thermal shutdown protection and also internal kickback protection diodes.
- Users can run the motors on 4.5V DC to 25V DC.
₨160.00L298N Dual Motor Driver IC 2A 5V-46V in Pakistan
SKU: N/AL298 Dual Bridge Motor Driver
₨200.00L298N Motor Driver Module in Pakistan
SKU: N/A- It has a double H-bridge drive chip of L298N.
- 5V is its logical voltages.
- Its drive voltages are 5V- 35V.
- 0 to 36mA is its logical current.
- Its drive current is 2A for MAX single bridge.
- Its max power value is 25W.
- Its dimensions are 43 x 43 x 26mm.
- Its weight is almost 26g.
₨650.00Mach3 Breakout Board 5 Axes CNC Breakout Board With Optical Coupler For MACH3 Stepper Motor Drive
SKU: N/AMACH3 Interface Board CNC 5 Axis With Optocoupler Adapter Stepper Motor Driver
₨750.00 Mach3 Breakout Board 5 Axis CNC in Pakistan
SKU: N/A- Fully support of MACH3 and other computer software support for parallel port control.
- USB power supply and peripherals powered phase separation to protect computer security.
- Peripheral wide voltage input,12-24V, and anti-reverse function.
- All of the input signals, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
- Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
- P1 as PWM outputs can be controlled with optocoupler input spindle governor.
- It can be accessed by a common cathode or common anode input level to 5V drive.
₨250.00 Mini DC motor PWM governor in Pakistan
SKU: N/ADC motor PWM governor 3V6 12 24 35V speed control ultra-small LED dimmer 5A (C6A4)
₨920.00Monster Motor Controller Shield 14A, 5.5-16V in Pakistan
SKU: N/ASpecifications of Monster Motor Controller Shield:
• The maximum current capacity is 30A
• Maximum voltages of the shield are 16V
• MOSFET on-resistance is 19mOhm (per leg)
•20kHz is its Maximum PWM frequency
• it will Undervoltage and overvoltage shutdown
₨440.00PCA9685 16 Channel Servo Motor Driver in Pakistan
SKU: N/A- 16 channel servo motor driver power supply is 5V compliant and still talks to a 3.3V microcontroller.
- this motor driver contains 6 address select pins.
- these address pins are used for configuring up to 62 ICs on a single I2C bus.
- this motor driver has an adjustable PWM frequency of up to 1.6KHz almost.
- this driver has a 12-bits frequency resolution.
₨730.00TB6560 3A CNC Router 1 Axis Driver Board Stepper Motor Drivers in Pakistan
SKU: N/A- Its working voltages are 10 – 35 volts. But our recommended Switching Power supply is DC 24V.
- It contains a 6N137 high-speed optocoupler. This 6N137 optocoupler ensures a high speed without step out.
- It contains TOSHIBA chip TB6560AHQ that is a low-voltage shutdown.
- This TB6560 chip also has the feature of overheating protection and over-current protection circuit to ensure optimal performance.
- Its output current is 3A.
- Its peak output current is 3.5A.
₨780.00TB6600 Hybrid Stepper Motor Driver (4.5A) in Pakistan
SKU: N/AStepper Motor Driver TB6600
1) Working voltage DC 10V-45V. Recommend the use of switching power supply DC32V.
2) The use of high-speed optical coupling 6N137, ensuring high speed without losing step.
3) The use of Toshiba’s new high-current, high-voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short circuit protection and increased compared to TB6560.
4) The maximum rated output reaches: ± 4.5A.
5) for less than 4.2A 42,57,86 two-phase / four-phase / four-wire / six wire stepper motor.
₨1,000.00 – ₨1,200.00TB6600 Stepper Motor Driver in Pakistan
SKU: N/A- Its input current is 0 to 5A.
- 0.5 to 4A is its output current.
- Its control signal is 3.3 to 24 Volts.
- It contains a maximum of 160W power.
- Its micro-steps are 1, 2/A, 2/B, 4, 8, 16, 32
- Its temperature range is -10 to 45 degrees centigrade.
₨20.00Thyristor Driver MOC3021/3020 in Pakistan
SKU: N/AThe MOC3021/3020 Series consists of Gallium Arsenide infrared emitting diodes, optically coupled to a silicon bilateral switch. To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option. They are designed for applications requiring isolated triac triggering.
₨20.00ULN2003 IC DIP Stepper Motor Drive in Pakistan
SKU: N/AULN2003 IC Stepper Motor Drive
Original Product
10V-60V DC Motor Speed Regulation Module PWM Controller 20A Motor Driver in Pakistan
- 10V-60V DC Motor Speed Regulation Module PWM Controller 20A Motor Driver
- Output voltage: Linear loading
- Input voltage: DC10-60V
- Output current: 0-20A
- Continuous current: 1200W
₨1,600.00
Add to cart
28YBJ-48 DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Drive in Pakistan
dc-5v-4-phase-5-wire-stepper-motor-with-uln200
A3967 Stepper Motor Easy Driver Board in Pakistan
EasyDriver Shield Stepper Motor Driver A3967
₨230.00
Add to cart
A4988 Stepper Motor Driver in Pakistan
- its supply voltage is 8 to 35V DC.
- it has 1A current without a heatsink.
- it gives 2 A current with the heat sink.
- 3 to 5.5V is logical input.
₨130.00
Add to cart
DRV8825 Stepper Motor Driver in Pakistan
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pin-out and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
₨170.00
Add to cart
L293D Motor Driver Shield in Pakistan
- It is multi-function and easy to operate.
- It has powerful drive library support and feature updates.
- It supports 4-channel DC motor Drives, stepper motor, or 2 while driving two servos.
- We can connect 2 connections for 5V servos connected to the Arduino’s high-resolution dedication timer.
- H-bridge motor driver chipset provides 0.6A per bridge and peaks current is 1.2A with thermal shutdown protection and also internal kickback protection diodes.
- Users can run the motors on 4.5V DC to 25V DC.
₨270.00
Add to cart
L298N Motor Driver Module in Pakistan
- It has a double H-bridge drive chip of L298N.
- 5V is its logical voltages.
- Its drive voltages are 5V- 35V.
- 0 to 36mA is its logical current.
- Its drive current is 2A for MAX single bridge.
- Its max power value is 25W.
- Its dimensions are 43 x 43 x 26mm.
- Its weight is almost 26g.
₨200.00
Add to cart
Mach3 Breakout Board 5 Axes CNC Breakout Board With Optical Coupler For MACH3 Stepper Motor Drive
MACH3 Interface Board CNC 5 Axis With Optocoupler Adapter Stepper Motor Driver
₨650.00
Add to cart
Mach3 Breakout Board 5 Axis CNC in Pakistan
- Fully support of MACH3 and other computer software support for parallel port control.
- USB power supply and peripherals powered phase separation to protect computer security.
- Peripheral wide voltage input,12-24V, and anti-reverse function.
- All of the input signals, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
- Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
- P1 as PWM outputs can be controlled with optocoupler input spindle governor.
- It can be accessed by a common cathode or common anode input level to 5V drive.
Mini DC motor PWM governor in Pakistan
DC motor PWM governor 3V6 12 24 35V speed control ultra-small LED dimmer 5A (C6A4)
₨250.00 ₨300.00
Add to cart
Monster Motor Controller Shield 14A, 5.5-16V in Pakistan
Specifications of Monster Motor Controller Shield:
• The maximum current capacity is 30A
• Maximum voltages of the shield are 16V
• MOSFET on-resistance is 19mOhm (per leg)
•20kHz is its Maximum PWM frequency
• it will Undervoltage and overvoltage shutdown
₨920.00
Add to cart
PCA9685 16 Channel Servo Motor Driver in Pakistan
- 16 channel servo motor driver power supply is 5V compliant and still talks to a 3.3V microcontroller.
- this motor driver contains 6 address select pins.
- these address pins are used for configuring up to 62 ICs on a single I2C bus.
- this motor driver has an adjustable PWM frequency of up to 1.6KHz almost.
- this driver has a 12-bits frequency resolution.
₨440.00
Add to cart
TB6560 3A CNC Router 1 Axis Driver Board Stepper Motor Drivers in Pakistan
- Its working voltages are 10 – 35 volts. But our recommended Switching Power supply is DC 24V.
- It contains a 6N137 high-speed optocoupler. This 6N137 optocoupler ensures a high speed without step out.
- It contains TOSHIBA chip TB6560AHQ that is a low-voltage shutdown.
- This TB6560 chip also has the feature of overheating protection and over-current protection circuit to ensure optimal performance.
- Its output current is 3A.
- Its peak output current is 3.5A.
₨730.00
Add to cart
TB6600 Hybrid Stepper Motor Driver (4.5A) in Pakistan
Stepper Motor Driver TB6600
1) Working voltage DC 10V-45V. Recommend the use of switching power supply DC32V.
2) The use of high-speed optical coupling 6N137, ensuring high speed without losing step.
3) The use of Toshiba’s new high-current, high-voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short circuit protection and increased compared to TB6560.
4) The maximum rated output reaches: ± 4.5A.
5) for less than 4.2A 42,57,86 two-phase / four-phase / four-wire / six wire stepper motor.
TB6600 Stepper Motor Driver in Pakistan
- Its input current is 0 to 5A.
- 0.5 to 4A is its output current.
- Its control signal is 3.3 to 24 Volts.
- It contains a maximum of 160W power.
- Its micro-steps are 1, 2/A, 2/B, 4, 8, 16, 32
- Its temperature range is -10 to 45 degrees centigrade.
₨1,000.00 – ₨1,200.00
Select options
Thyristor Driver MOC3021/3020 in Pakistan
The MOC3021/3020 Series consists of Gallium Arsenide infrared emitting diodes, optically coupled to a silicon bilateral switch. To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option. They are designed for applications requiring isolated triac triggering.
₨20.00
Add to cart
ULN2003 IC DIP Stepper Motor Drive in Pakistan
ULN2003 IC Stepper Motor Drive
Original Product
₨20.00
Add to cart
10V-60V DC Motor Speed Regulation Module PWM Controller 20A Motor Driver in Pakistan
- 10V-60V DC Motor Speed Regulation Module PWM Controller 20A Motor Driver
- Output voltage: Linear loading
- Input voltage: DC10-60V
- Output current: 0-20A
- Continuous current: 1200W
₨1,600.00
Add to cart
28YBJ-48 DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Drive in Pakistan
dc-5v-4-phase-5-wire-stepper-motor-with-uln200
A3967 Stepper Motor Easy Driver Board in Pakistan
EasyDriver Shield Stepper Motor Driver A3967
₨230.00
Add to cart
A4988 Stepper Motor Driver in Pakistan
- its supply voltage is 8 to 35V DC.
- it has 1A current without a heatsink.
- it gives 2 A current with the heat sink.
- 3 to 5.5V is logical input.
₨130.00
Add to cart
DRV8825 Stepper Motor Driver in Pakistan
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pin-out and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
₨170.00
Add to cart
L293D Motor Driver Shield in Pakistan
- It is multi-function and easy to operate.
- It has powerful drive library support and feature updates.
- It supports 4-channel DC motor Drives, stepper motor, or 2 while driving two servos.
- We can connect 2 connections for 5V servos connected to the Arduino’s high-resolution dedication timer.
- H-bridge motor driver chipset provides 0.6A per bridge and peaks current is 1.2A with thermal shutdown protection and also internal kickback protection diodes.
- Users can run the motors on 4.5V DC to 25V DC.
₨270.00
Add to cart
L298N Motor Driver Module in Pakistan
- It has a double H-bridge drive chip of L298N.
- 5V is its logical voltages.
- Its drive voltages are 5V- 35V.
- 0 to 36mA is its logical current.
- Its drive current is 2A for MAX single bridge.
- Its max power value is 25W.
- Its dimensions are 43 x 43 x 26mm.
- Its weight is almost 26g.
₨200.00
Add to cart
Mach3 Breakout Board 5 Axes CNC Breakout Board With Optical Coupler For MACH3 Stepper Motor Drive
MACH3 Interface Board CNC 5 Axis With Optocoupler Adapter Stepper Motor Driver
₨650.00
Add to cart
Mach3 Breakout Board 5 Axis CNC in Pakistan
- Fully support of MACH3 and other computer software support for parallel port control.
- USB power supply and peripherals powered phase separation to protect computer security.
- Peripheral wide voltage input,12-24V, and anti-reverse function.
- All of the input signals, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
- Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
- P1 as PWM outputs can be controlled with optocoupler input spindle governor.
- It can be accessed by a common cathode or common anode input level to 5V drive.
Mini DC motor PWM governor in Pakistan
DC motor PWM governor 3V6 12 24 35V speed control ultra-small LED dimmer 5A (C6A4)
₨250.00 ₨300.00
Add to cart
Monster Motor Controller Shield 14A, 5.5-16V in Pakistan
Specifications of Monster Motor Controller Shield:
• The maximum current capacity is 30A
• Maximum voltages of the shield are 16V
• MOSFET on-resistance is 19mOhm (per leg)
•20kHz is its Maximum PWM frequency
• it will Undervoltage and overvoltage shutdown
₨920.00
Add to cart
PCA9685 16 Channel Servo Motor Driver in Pakistan
- 16 channel servo motor driver power supply is 5V compliant and still talks to a 3.3V microcontroller.
- this motor driver contains 6 address select pins.
- these address pins are used for configuring up to 62 ICs on a single I2C bus.
- this motor driver has an adjustable PWM frequency of up to 1.6KHz almost.
- this driver has a 12-bits frequency resolution.
₨440.00
Add to cart
TB6560 3A CNC Router 1 Axis Driver Board Stepper Motor Drivers in Pakistan
- Its working voltages are 10 – 35 volts. But our recommended Switching Power supply is DC 24V.
- It contains a 6N137 high-speed optocoupler. This 6N137 optocoupler ensures a high speed without step out.
- It contains TOSHIBA chip TB6560AHQ that is a low-voltage shutdown.
- This TB6560 chip also has the feature of overheating protection and over-current protection circuit to ensure optimal performance.
- Its output current is 3A.
- Its peak output current is 3.5A.
₨730.00
Add to cart
TB6600 Hybrid Stepper Motor Driver (4.5A) in Pakistan
Stepper Motor Driver TB6600
1) Working voltage DC 10V-45V. Recommend the use of switching power supply DC32V.
2) The use of high-speed optical coupling 6N137, ensuring high speed without losing step.
3) The use of Toshiba’s new high-current, high-voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short circuit protection and increased compared to TB6560.
4) The maximum rated output reaches: ± 4.5A.
5) for less than 4.2A 42,57,86 two-phase / four-phase / four-wire / six wire stepper motor.
TB6600 Stepper Motor Driver in Pakistan
- Its input current is 0 to 5A.
- 0.5 to 4A is its output current.
- Its control signal is 3.3 to 24 Volts.
- It contains a maximum of 160W power.
- Its micro-steps are 1, 2/A, 2/B, 4, 8, 16, 32
- Its temperature range is -10 to 45 degrees centigrade.
₨1,000.00 – ₨1,200.00
Select options
Thyristor Driver MOC3021/3020 in Pakistan
The MOC3021/3020 Series consists of Gallium Arsenide infrared emitting diodes, optically coupled to a silicon bilateral switch. To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option. They are designed for applications requiring isolated triac triggering.
₨20.00
Add to cart
ULN2003 IC DIP Stepper Motor Drive in Pakistan
ULN2003 IC Stepper Motor Drive
Original Product
₨20.00
Add to cart
10V-60V DC Motor Speed Regulation Module PWM Controller 20A Motor Driver in Pakistan
- 10V-60V DC Motor Speed Regulation Module PWM Controller 20A Motor Driver
- Output voltage: Linear loading
- Input voltage: DC10-60V
- Output current: 0-20A
- Continuous current: 1200W
₨1,600.00
Add to cart
28YBJ-48 DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Drive in Pakistan
dc-5v-4-phase-5-wire-stepper-motor-with-uln200
₨220.00
Add to cart
A3967 Stepper Motor Easy Driver Board in Pakistan
EasyDriver Shield Stepper Motor Driver A3967
₨230.00
Add to cart
A4988 Stepper Motor Driver in Pakistan
- its supply voltage is 8 to 35V DC.
- it has 1A current without a heatsink.
- it gives 2 A current with the heat sink.
- 3 to 5.5V is logical input.
₨130.00
Add to cart
DRV8825 Stepper Motor Driver in Pakistan
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pin-out and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
₨170.00
Add to cart
L293D Motor Driver Shield in Pakistan
- It is multi-function and easy to operate.
- It has powerful drive library support and feature updates.
- It supports 4-channel DC motor Drives, stepper motor, or 2 while driving two servos.
- We can connect 2 connections for 5V servos connected to the Arduino’s high-resolution dedication timer.
- H-bridge motor driver chipset provides 0.6A per bridge and peaks current is 1.2A with thermal shutdown protection and also internal kickback protection diodes.
- Users can run the motors on 4.5V DC to 25V DC.
₨270.00
Add to cart
L298N Motor Driver Module in Pakistan
- It has a double H-bridge drive chip of L298N.
- 5V is its logical voltages.
- Its drive voltages are 5V- 35V.
- 0 to 36mA is its logical current.
- Its drive current is 2A for MAX single bridge.
- Its max power value is 25W.
- Its dimensions are 43 x 43 x 26mm.
- Its weight is almost 26g.
₨200.00
Add to cart
Mach3 Breakout Board 5 Axes CNC Breakout Board With Optical Coupler For MACH3 Stepper Motor Drive
MACH3 Interface Board CNC 5 Axis With Optocoupler Adapter Stepper Motor Driver
₨650.00
Add to cart
Mach3 Breakout Board 5 Axis CNC in Pakistan
- Fully support of MACH3 and other computer software support for parallel port control.
- USB power supply and peripherals powered phase separation to protect computer security.
- Peripheral wide voltage input,12-24V, and anti-reverse function.
- All of the input signals, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
- Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
- P1 as PWM outputs can be controlled with optocoupler input spindle governor.
- It can be accessed by a common cathode or common anode input level to 5V drive.
₨750.00 ₨800.00
Add to cart
Mini DC motor PWM governor in Pakistan
DC motor PWM governor 3V6 12 24 35V speed control ultra-small LED dimmer 5A (C6A4)
₨250.00 ₨300.00
Add to cart
Monster Motor Controller Shield 14A, 5.5-16V in Pakistan
Specifications of Monster Motor Controller Shield:
• The maximum current capacity is 30A
• Maximum voltages of the shield are 16V
• MOSFET on-resistance is 19mOhm (per leg)
•20kHz is its Maximum PWM frequency
• it will Undervoltage and overvoltage shutdown
₨920.00
Add to cart
PCA9685 16 Channel Servo Motor Driver in Pakistan
- 16 channel servo motor driver power supply is 5V compliant and still talks to a 3.3V microcontroller.
- this motor driver contains 6 address select pins.
- these address pins are used for configuring up to 62 ICs on a single I2C bus.
- this motor driver has an adjustable PWM frequency of up to 1.6KHz almost.
- this driver has a 12-bits frequency resolution.
₨440.00
Add to cart
TB6560 3A CNC Router 1 Axis Driver Board Stepper Motor Drivers in Pakistan
- Its working voltages are 10 – 35 volts. But our recommended Switching Power supply is DC 24V.
- It contains a 6N137 high-speed optocoupler. This 6N137 optocoupler ensures a high speed without step out.
- It contains TOSHIBA chip TB6560AHQ that is a low-voltage shutdown.
- This TB6560 chip also has the feature of overheating protection and over-current protection circuit to ensure optimal performance.
- Its output current is 3A.
- Its peak output current is 3.5A.
₨730.00
Add to cart
TB6600 Hybrid Stepper Motor Driver (4.5A) in Pakistan
Stepper Motor Driver TB6600
1) Working voltage DC 10V-45V. Recommend the use of switching power supply DC32V.
2) The use of high-speed optical coupling 6N137, ensuring high speed without losing step.
3) The use of Toshiba’s new high-current, high-voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short circuit protection and increased compared to TB6560.
4) The maximum rated output reaches: ± 4.5A.
5) for less than 4.2A 42,57,86 two-phase / four-phase / four-wire / six wire stepper motor.
₨780.00
Read more
TB6600 Stepper Motor Driver in Pakistan
- Its input current is 0 to 5A.
- 0.5 to 4A is its output current.
- Its control signal is 3.3 to 24 Volts.
- It contains a maximum of 160W power.
- Its micro-steps are 1, 2/A, 2/B, 4, 8, 16, 32
- Its temperature range is -10 to 45 degrees centigrade.
₨1,000.00 – ₨1,200.00
Select options
Thyristor Driver MOC3021/3020 in Pakistan
The MOC3021/3020 Series consists of Gallium Arsenide infrared emitting diodes, optically coupled to a silicon bilateral switch. To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option. They are designed for applications requiring isolated triac triggering.
₨20.00
Add to cart
ULN2003 IC DIP Stepper Motor Drive in Pakistan
ULN2003 IC Stepper Motor Drive
Original Product
₨20.00
Add to cart
