Monster Motor Controller Shield 14A, 5.5-16V in Pakistan
₨920Specifications of Monster Motor Controller Shield:
• The maximum current capacity is 30A
• Maximum voltages of the shield are 16V
• MOSFET on-resistance is 19mOhm (per leg)
•20kHz is its Maximum PWM frequency
• it will Undervoltage and overvoltage shutdown
PCA9685 16 Channel Servo Motor Driver in Pakistan
₨1,200- 16 channel servo motor driver power supply is 5V compliant and still talks to a 3.3V microcontroller.
- this motor driver contains 6 address select pins.
- these address pins are used for configuring up to 62 ICs on a single I2C bus.
- this motor driver has an adjustable PWM frequency of up to 1.6KHz almost.
- this driver has a 12-bits frequency resolution.
Stepper Motor Driver A4988 in Pakistan
₨300- its supply voltage is 8 to 35V DC.
- it has 1A current without a heatsink.
- it gives 2 A current with the heat sink.
- 3 to 5.5V is logical input.
Stepper Motor Driver TB6600 in Pakistan
Original price was: ₨1,800.₨1,650Current price is: ₨1,650.- Its input current is 0 to 5A.
- 0.5 to 4A is its output current.
- Its control signal is 3.3 to 24 Volts.
- It contains a maximum of 160W Â power.
- Its micro-steps are 1, 2/A, 2/B, 4, 8, 16, 32
- Its temperature range is -10 to 45 degrees centigrade.
Stepper Motor Drivers TB6560 3A CNC Router 1 Axis Driver Board in Pakistan
Original price was: ₨1,700.₨1,400Current price is: ₨1,400.- Its working voltages are 10 – 35 volts. But our recommended Switching Power supply is DC 24V.
- It contains a 6N137 high-speed optocoupler. This 6N137 optocoupler ensures a high speed without step out.
- It contains TOSHIBA chip TB6560AHQ that is a low-voltage shutdown.
- This TB6560 chip also has the feature of overheating protection and over-current protection circuit to ensure optimal performance.
- Its output current is 3A.
- Its peak output current is 3.5A.
TB6600 Hybrid Stepper Motor Driver (4.5A) in Pakistan
₨780Stepper Motor Driver TB6600
1) Working voltage DC 10V-45V. Recommend the use of switching power supply DC32V.
2) The use of high-speed optical coupling 6N137, ensuring high speed without losing step.
3) The use of Toshiba’s new high-current, high-voltage TB6600HG new original chip, there are low-pressure     shut-off, overheating parking and over-current protection circuit, short circuit protection and increased       compared to TB6560.
4) The maximum rated output reaches: ± 4.5A.
5) for less than 4.2A 42,57,86 two-phase / four-phase / four-wire / six wire stepper motor.
TB6612 / DRV8833 Dual Motor Driver Module – 1A H-Bridge for Arduino & Robotics
Original price was: ₨670.₨550Current price is: ₨550. Buy via WhatsApp
ULN2003 IC DIP Stepper Motor Drive in Pakistan
₨25ULN2003 IC Stepper Motor Drive
Original Product
ULN2803 IC in Pakistan
₨50This DIP chip contains 8 drivers that can sink 500mA from a 50V supply and has kickback diodes included inside for driving coils. This will let your little microcontroller or microcomputer power solenoids, DC motors (in one direction) and unipolar stepper motors.