
WiFi Shield V2.2 for Arduino in Pakistan
SKU: N/ASPECIFICATION
- Wifi Chip is WizFi210
- Radio Protocol is IEEE 802.11b/g/n Compatible
- its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
- its Modulation consist of DSSS and CCK
- RF Operating Frequency is 2.4 – 2.497 GHz
- Antenna Options are Chip antenna and U.FL connector for external antenna
- Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
- Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
- RF Output Power (Typical) is 8dBm ± 1dBm
- Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
- I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
- Power Source is approximate 3.3V
- Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)

WiFi Shield V2.2 for Arduino in Pakistan
SPECIFICATION
- Wifi Chip is WizFi210
- Radio Protocol is IEEE 802.11b/g/n Compatible
- its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
- its Modulation consist of DSSS and CCK
- RF Operating Frequency is 2.4 – 2.497 GHz
- Antenna Options are Chip antenna and U.FL connector for external antenna
- Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
- Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
- RF Output Power (Typical) is 8dBm ± 1dBm
- Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
- I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
- Power Source is approximate 3.3V
- Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)
₨8,000.00
Add to cart

WiFi Shield V2.2 for Arduino in Pakistan
SPECIFICATION
- Wifi Chip is WizFi210
- Radio Protocol is IEEE 802.11b/g/n Compatible
- its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
- its Modulation consist of DSSS and CCK
- RF Operating Frequency is 2.4 – 2.497 GHz
- Antenna Options are Chip antenna and U.FL connector for external antenna
- Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
- Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
- RF Output Power (Typical) is 8dBm ± 1dBm
- Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
- I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
- Power Source is approximate 3.3V
- Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)
₨8,000.00
Add to cart

WiFi Shield V2.2 for Arduino in Pakistan
SPECIFICATION
- Wifi Chip is WizFi210
- Radio Protocol is IEEE 802.11b/g/n Compatible
- its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
- its Modulation consist of DSSS and CCK
- RF Operating Frequency is 2.4 – 2.497 GHz
- Antenna Options are Chip antenna and U.FL connector for external antenna
- Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
- Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
- RF Output Power (Typical) is 8dBm ± 1dBm
- Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
- I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
- Power Source is approximate 3.3V
- Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)
₨8,000.00
Add to cart