CNC Shield V3 Expansion Board for Arduino UNO in Pakistan
₨350CNC Shield V3 A4988 Stepper Motor Driver Expansion Board for Arduino UNO 3D
V3 Engraver Shield Expansion Board A4988 Driver for Arduino 3D Printer CNC
DRV8825 Stepper Motor Driver in Pakistan
₨560The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pin-out and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
Mach3 Breakout Board 5 Axis CNC in Pakistan
₨1,340- Fully support of MACH3 and other computer software support for parallel port control.
- USB power supply and peripherals powered phase separation to protect computer security.
- Peripheral wide voltage input,12-24V, and anti-reverse function.
- All of the input signals, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
- All the way to the relay output port, control spindle switch. Output port P17 mouth.
- All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
- Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
- P1 as PWM outputs can be controlled with optocoupler input spindle governor.
- It can be accessed by a common cathode or common anode input level to 5V drive.
Mini 4-Channel Motor Driver Shield Expansion Board L293D Module in Pakistan
₨200- Its name is the mini L293D motor drive expansion board.
- Its weight is 11.2g.
- Its size is standard.
- Its input voltage is DC 4.5 – 25V.
- 600mA Output Current Capability Per Channel
- It contains 600mA output current capability per channel.
- It has 1.2A peak output current per channel.
Stepper Motor Driver TB6600 in Pakistan
Original price was: ₨1,800.₨1,650Current price is: ₨1,650.- Its input current is 0 to 5A.
- 0.5 to 4A is its output current.
- Its control signal is 3.3 to 24 Volts.
- It contains a maximum of 160W power.
- Its micro-steps are 1, 2/A, 2/B, 4, 8, 16, 32
- Its temperature range is -10 to 45 degrees centigrade.
TB6600 Hybrid Stepper Motor Driver (4.5A) in Pakistan
₨780Stepper Motor Driver TB6600
1) Working voltage DC 10V-45V. Recommend the use of switching power supply DC32V.
2) The use of high-speed optical coupling 6N137, ensuring high speed without losing step.
3) The use of Toshiba’s new high-current, high-voltage TB6600HG new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit, short circuit protection and increased compared to TB6560.
4) The maximum rated output reaches: ± 4.5A.
5) for less than 4.2A 42,57,86 two-phase / four-phase / four-wire / six wire stepper motor.