TFT LCD Shield V2.2 Expansion Board for Arduino in Pakistan 500.00

TFT LCD Shield V2.2 Expansion Board for Arduino in Pakistan

0 out of 5
(0)
SKU: N/A
  • This board has been updated to white in Rev2.0.
  • Support for 16-bit mode and IRQ has been canceled.
  • CS is connected to GND. So you need to fix your code.
  • We have updated the demo code.
    The TFT01 LCD module works at a 3.3V voltage level and is not compatible with Arduino pins, so 
  • Create a shield for the Arduino. Now the user plugs the TFT01 directly into the shield and 
  • It can be used on the Arduino board.
Add to cart
TFT LCD Shield V2.2 Expansion Board for Arduino in Pakistan

TFT LCD Shield V2.2 Expansion Board for Arduino in Pakistan

0 out of 5
(0)
  • This board has been updated to white in Rev2.0.
  • Support for 16-bit mode and IRQ has been canceled.
  • CS is connected to GND. So you need to fix your code.
  • We have updated the demo code.
    The TFT01 LCD module works at a 3.3V voltage level and is not compatible with Arduino pins, so 
  • Create a shield for the Arduino. Now the user plugs the TFT01 directly into the shield and 
  • It can be used on the Arduino board.
SKU: N/A
500.00 Add to cart
TFT LCD Shield V2.2 Expansion Board for Arduino in Pakistan

TFT LCD Shield V2.2 Expansion Board for Arduino in Pakistan

0 out of 5
(0)
  • This board has been updated to white in Rev2.0.
  • Support for 16-bit mode and IRQ has been canceled.
  • CS is connected to GND. So you need to fix your code.
  • We have updated the demo code.
    The TFT01 LCD module works at a 3.3V voltage level and is not compatible with Arduino pins, so 
  • Create a shield for the Arduino. Now the user plugs the TFT01 directly into the shield and 
  • It can be used on the Arduino board.
500.00 Add to cart
TFT LCD Shield V2.2 Expansion Board for Arduino in Pakistan

TFT LCD Shield V2.2 Expansion Board for Arduino in Pakistan

0 out of 5
(0)
  • This board has been updated to white in Rev2.0.
  • Support for 16-bit mode and IRQ has been canceled.
  • CS is connected to GND. So you need to fix your code.
  • We have updated the demo code.
    The TFT01 LCD module works at a 3.3V voltage level and is not compatible with Arduino pins, so 
  • Create a shield for the Arduino. Now the user plugs the TFT01 directly into the shield and 
  • It can be used on the Arduino board.
500.00 Add to cart