wifi-shield-arduino 8,000.00

WiFi Shield V2.2 for Arduino in Pakistan

0 out of 5
(0)
SKU: N/A

SPECIFICATION

 

  • Wifi Chip is  WizFi210
  • Radio Protocol is IEEE 802.11b/g/n Compatible
  • its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
  • its Modulation consist of DSSS and CCK
  • RF Operating Frequency is 2.4 – 2.497 GHz
  • Antenna Options are Chip antenna and U.FL connector for external antenna
  • Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
  • Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
  • RF Output Power (Typical) is 8dBm ± 1dBm
  • Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
  • I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
  • Power Source is approximate 3.3V
  • Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)

 

Add to cart
wifi-shield-arduino

WiFi Shield V2.2 for Arduino in Pakistan

0 out of 5
(0)

SPECIFICATION

 

  • Wifi Chip is  WizFi210
  • Radio Protocol is IEEE 802.11b/g/n Compatible
  • its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
  • its Modulation consist of DSSS and CCK
  • RF Operating Frequency is 2.4 – 2.497 GHz
  • Antenna Options are Chip antenna and U.FL connector for external antenna
  • Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
  • Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
  • RF Output Power (Typical) is 8dBm ± 1dBm
  • Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
  • I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
  • Power Source is approximate 3.3V
  • Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)

 

SKU: N/A
8,000.00 Add to cart
wifi-shield-arduino

WiFi Shield V2.2 for Arduino in Pakistan

0 out of 5
(0)

SPECIFICATION

 

  • Wifi Chip is  WizFi210
  • Radio Protocol is IEEE 802.11b/g/n Compatible
  • its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
  • its Modulation consist of DSSS and CCK
  • RF Operating Frequency is 2.4 – 2.497 GHz
  • Antenna Options are Chip antenna and U.FL connector for external antenna
  • Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
  • Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
  • RF Output Power (Typical) is 8dBm ± 1dBm
  • Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
  • I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
  • Power Source is approximate 3.3V
  • Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)

 

8,000.00 Add to cart
wifi-shield-arduino

WiFi Shield V2.2 for Arduino in Pakistan

0 out of 5
(0)

SPECIFICATION

 

  • Wifi Chip is  WizFi210
  • Radio Protocol is IEEE 802.11b/g/n Compatible
  • its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
  • its Modulation consist of DSSS and CCK
  • RF Operating Frequency is 2.4 – 2.497 GHz
  • Antenna Options are Chip antenna and U.FL connector for external antenna
  • Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
  • Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
  • RF Output Power (Typical) is 8dBm ± 1dBm
  • Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
  • I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
  • Power Source is approximate 3.3V
  • Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)

 

8,000.00 Add to cart