CH341A EEPROM Flash BIOS USB Programmer in Pakistan
This Ch341 USB programmer contains 24 EEPROM and 25 SPI Flash 8 /16 pin chip. CH341 programmer consists of a CH341 chip. It can automatically recognize 25 series of chips. Users can easily recognize the module’s working status with the help of a 24/25 series indicator lamp.
This low-cost mini USB CH341 programmer is user friendly. It also supports USB to TTL conversion. SOP8 SOP16 to DIP8 converter board makes the connection with different chips easily. CH341 programmer is a USB bus converter chip. It is providing UART, printer port, parallel and synchronous serial with 2-wire or 4 wires through the USB bus. It provides alternant rate control signals like serial transfer enable.
CH341A Programmer also provides serial receive in ready. CH341 provides alternant rate control signals like serial transfer enable, serial receive in ready. It also provides a common MODEM communication signal to expand UART for a computer. it also provides MODEM communication to upgrade common synchronous interface device to USB bus directly. CH341 supplies a standard USB printer port which compounds USB relevant protocol and Windows operating system used to upgrade the ordinary parallel printer to USB bus directly.
In parallel mode, CH341 gives out an 8-bit parallel in EPP or MEM mode. This programmer can be used to input/output data directly without MCU/DSP. CH341 supports some common serials such as 2 wire (SCL, SDA) and 4 wire (CS, SCK/CLK, MISO/SDI/DIN, and MOSI/SDO/DOUT) interface. Get Programmers, Modules, Sensors, and Frames from Pakistan’s Online Store at epro.pk.
Features of CH341A EEPROM Flash BIOS USB Programmer:
- CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software and Driver.
- It supports 24EEPROM and 25 SPI flash 8 / 16 pin chip
- It supports 25 SPI flash.
- It contains an automatic identification chip model 25 series.
- It supports USB to TTL to recognize 25 series chips automatically.
- It has a multi-purpose hine and an online brush.
- It supports download STC series procedure of single-chip.
- STC microcontroller supports a full range of program download.
- It provides a variety of software for backup, erases, programming, calibration, and other movements.
- It provides 5V-3.3V power supply output.
- It contains a 24/25 status indicator lamp.
- Its size is 70x27mm.
- One piece of CH341 24 25 Series EEPROM Flash BIOS USB Programmer
- One piece of Pinboard
- Two-piece of Pins.