Flysky FS-i6X 2.4GHz RC Transmitter with FS-iA10B Receiver

Flysky FS-i6X radio-control transmitter bundle

The Flysky FS-i6X is a 2.4GHz radio-control transmitter using AFHDS 2A. This product listing describes a bundle with an FS-iA10B receiver for a compatible RC installation. Confirm the receiver actually supplied with the chosen bundle before ordering, because the catalogue also carries 6-channel and 10-channel receiver labels.

Understand transmitter and receiver channel counts

Flysky’s FS-i6X specification lists 6–10 channels, with six as the default configuration. Available controls and channels depend on the transmitter’s actual configuration and supported setup. A receiver labelled 10-channel does not by itself establish that all ten channels are enabled at the transmitter.

The existing bundle description identifies the FS-iA10B as a 10-channel receiver. Check the receiver model, firmware configuration and required output format for the intended aircraft, boat or other compatible model. Do not assume that every 2.4GHz receiver can bind to this transmitter.

Manufacturer-listed transmitter details

• Model: FS-i6X.
• Wireless band: 2.4GHz.
• Protocol: AFHDS 2A.
• Channels: 6–10, configuration-dependent; default six.
• Battery arrangement: four 1.5V AA cells.
• Display: 128 × 64 LCD.
• Charging port: none specified.

Check the package and install safely

The previous package description lists a transmitter, FS-iA10B receiver, binding cable, update cable and manual. Confirm the current bundle contents and receiver choice rather than assuming every accessory or battery is included. Follow the exact receiver’s manual for supply voltage, output pins and connected equipment.

Bind the radio, verify control direction and configure failsafe behavior before use. For powered models, perform setup with the motor made safe and propellers removed where applicable. Follow the manufacturer’s range-check procedure; no guaranteed operating distance or interference-free operation is established here.

Frequently asked questions

Is it automatically a ten-channel system?

No. Check the enabled transmitter channels, receiver model and configuration.

Can it charge its batteries through the radio?

The manufacturer specification lists no onboard charging port. Follow the radio’s battery instructions and use appropriate external charging equipment where applicable.