SCS10UU 10mm Ball Bearing Slide Bushing Linear Shaft For CNC & 3D Printer
₨590Model: SC10UU
Shaft ID: 10mm
Inner Diameter: 10mm
Main Details : working with linear rails.
1X SCS10UU 10mm Ball Bearing Slide Bushing Linear Shaft For CNC & 3D Printer
SCS8UU Linear Motion Ball Bearing CNC Machinery Slide
₨460Model: SCS8UU Linear Bearing
Material: Metal, Rubber, Plastic
Inner Diameter: 8mm / 0.31 “, 10mm / 0.39”
Linear slider
spider housing
Linear guide slider
1XSCS8UU Linear Motion Ball Bearing CNC Machinery Slide
SD Card 16 GB Class 10 For Raspberry Pi
Original price was: ₨1,000.₨950Current price is: ₨950. Buy via WhatsApp
SD Card Adapter Reading Writing Module in Pakistan
Original price was: ₨250.₨220Current price is: ₨220.- SD Card module can make your SD application easier and simple.
- This module can handle 2GB SD cards.
- It easily interfaces as a peripheral to your Arduino sensor shield module.
- Through programming, you can read and write to the SD card using your Arduino.
- Can use for SD Card more easily, such as for MP3 Player, MCU/ARM system control.
- All SD SPI pins output, MOSI, SCK, MISO, and CS.
- Support 5V/3.3V input.
- LED indicator.
- SD Card Holder.
- Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
- A land pattern for USD interface (USD holder is not mount).
Self Balancing Robot Chassis With Wheel And Encoder Motors
₨7,950- 25GA370 high power metal, carbon gold brush motor
- Rated voltage:12V, unload: 320RPM, 0.08A
- Max.efficiency: 5.53W, 284RPM, 0.6A, 1.88kgfcm
- Cut off current:4.5A, torque: 15.9Kgfcm
SEN0121 Steam Sensor Module in Pakistan
₨500SPECIFICATIONS
- Power supply is 3.3v or 5v
- Output voltage signal is 0~4.5v(@5v) or 0~3.0v(@3.3v)
Pin definition is the following:
- Analog output wire is Blue
- The black wire is for GND
- The power wire is Red wire
- Size of the module is 30x20x6mm
- please be careful. don’t touch this connector directly in water.
- this connector is not waterproof.
- Power supply is 3.3v or 5v
- Output voltage signal is 0~4.5v(@5v) or 0~3.0v(@3.3v)
Servo Motor MG996R -180 degree in Pakistan
₨880Specifications:
it is Stable and Shock Proof
this is Coreless Motor
it has Metal Gears
it has Double Ball Bearing
its Connector Wire Length 300mm (12″)
its dimensions are 40mm x 19mm x 43mm (approx 1.5″ x 3/4″ x 1.5″)
its weight is just 55g (just over 2 oz)
Operating Speed is just 0.17sec / 60 degrees (4.8V no load)
Operating Speed is just 0.13sec / 60 degrees (6.0V no load)
Stall Torque is 9 kg-cm (180.5 oz-in) at 4.8V
Stall Torque :is almost 12 kg-cm (208.3 oz-in) at 6V
Voltages are 4.8 – 7.2Volts
its Color is Black
its Connector Wire is Heavy Duty, 11.81″ (300mm)
Servo Motor SG90 Acrylic Bracket PMMA for DIY Smart Car RC Robot Helicopter Airplane Boat Control in Pakistan
₨80It is PMMA acrylic support for SG90 servo motor.
Servo Motor TowerPro SG90 Degree 360 in Pakistan
₨310- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power