CNC 3D printer Mechanical Switch used a lever switch for detection. it detects by lever when it is activated. when the CNC end stop switch is activated, it pulls the signal LOW. this mechanical limit switch also contains LED, this LED will glow up when the switch is activated. this is the best limit switch than the old-style CD ROM audio connector cable. because the mechanical end stop switch uses a standard 4 pin 100″ pitch header and accepts a standard. this mechanical switch detects when any stage has reached its minimum or maximum, instead of messing with flags or complicated light beam interruption.
we can place the end stop switch in the path of the stage, this limit switch module will close the stage when it moves against it. we don’t need to change the stage by ownself when we place this switch properly and in the right place. this switch is also famous for its reliability. you can use these limit switches modules to do one million or more prints before having to replace this switch. epro.pk is the Best Online shopping website for all electronics components like the mechanical end-stop limit switch for CNC Printer Ramps 1.4, Sensors, and other modules in cheap price in all over in Pakistan.
- its operating voltages are 300V.
- its operating current is 2A.
- its temperature resistance is 80.
- 70 cm is the cable length.
Features of Best EndStop Switch with Cable for CNC 3D Printer:
- this switch is not easy to pull off, plug it convenient.
- plug the other side of the end-stop limit switch to do the one for ease of use.
- it contains quality switching elements.
- it is customized high-quality connection wires. this switch module using 22AWG copper wire with ratings of current 2A and 300V voltage.
- it contains an insulating layer over a wide range of temperatures. its maximum temperature range is 80 degrees.
Pin Connection of Mechanical End Stop Endstop Limit Switch for CNC 3D Printer RAMPS:
- it contains Redline which will be connected to the VCC.
- it also contains Blackline which will be connected to the GND.
- the Greenline will be connected to the connecting signal.
- one piece of CNC 3D Printer Mechanical Endstop Switch.
- one piece of 3 pins cable.