Showing 1405–1416 of 1922 results

R307 Optical Fingerprint Reader Module in Pakistan

Original price was: ₨3,700.Current price is: ₨3,500.
  • It has an independent fingerprint collection, fingerprint registration, fingerprint comparison, and fingerprint search (1:N) function.
  • It is a small size.
  • It has no external DSP chip algorithm.
  • It has been integrated, easy to install, and less fault.
  • It has ultra-low power consumption.
  • It is suitable for the low-power requirements of the occasion.
  • It has a strong anti-static ability.

Radial T Leaded PCB Mount Fuse, 4A 250VAC in Pakistan

80

Radial-T-Leaded-PCB-Mount-Fuse-4A-250V-AC

Radio Telemetry Kit 3DR With Case in Pakistan

5,000

Features of Radio Telemetry Kit:

* it is Small size and lightweight
* It is CP2102 high-quality USB to TTL chips
* Device Alternatively versions are 433MHZ or 915MHZ
* It supports MWC / APM / PX4 / Pixhawk other open-source flight control
* The sensitivity of Receiver is -118 dBm
* it has MAVLink Framework Agreement
* it has Open Source Firmware
* it has Frequency-hopping spread spectrum (FHSS)
* it contains 2-way full-duplex communication adaptive TDM
* it has Up to 25% can be corrected bit errors

* it based Si1000 and Si4432 wireless microcontroller modules.

Rain Water Sensor Module in Pakistan

180
  • Easy to Use
  • power supply: 3.3V to 5VDC
  • Come with jumper wires, 5 ways, female to female

RAMPS 1.4 3D Printer 2004 LCD Controller With SD Card Slot

2,600

RAMPS Shield 1.4 3D Printer Control Board in Pakistan

790

RAMPS 1.4 3D Printer Control Board

Ramps is short for reprap Arduino mega pololu shield, it is mainly designed for the purpose of using pololu stepper driven board (similar to 4988 driven board). Ramps can only work when connected to its mother board Mega 2560 and 4988/DRV8825. Owning to its stability in operation and great compatibility with most 3Dprinter (all reprap-model such as pursa i2 and i3). The combination of Ramps1.4 MEGA2560 A4988/DRV8825 is becoming a mainstream of DIY 3D printer control board.

Raspberry Pi 3 B+ in Pakistan

12,000

RASPBERRY PI 3 MODEL B+

  • 1.4GHz
  • 64-bit quad-core processor
  • Power Requirements: 5V, 2.5A via microUSB
  • Extended 40-pin GPIO Header
  • dual-band wireless LAN
  • Bluetooth 4.2/BLE
  • Faster Ethernet
  • Power Over Ethernet Support
  • With Separate PoE HAT

Raspberry Pi 3 Case in Pakistan

550

Features of Raspberry Pi Case:

 

The  Raspberry Pi 3 case in Pakistan is in a stunning Red and Grey design.

All primary ports are available and including microSD accessible

It has a removable side plate which allows access to that GPIO pins

Secure fit protects your Raspberry Pi.

It is anti-slip feet and keeps Raspberry Pi stable

Lights of Activity and Power still visible through the end of the case.

Raspberry Pi 3 Model B in Pakistan

27,000

The Raspberry Pi 3 has included integrated 802.11 b/g/n wireless LAN, Bluetooth Classical and LE. You

didn’t need additional peripherals to make it wireless. It is 10x the performance of Raspberry Pi 1.

Raspberry Pi 4 8GB RAM Model B Quad Core CPU 1.5Ghz Development Board in Pakistan

Original price was: ₨90,000.Current price is: ₨75,000.

Raspberry Pi 4 Model B 2GB RAM

Original price was: ₨40,000.Current price is: ₨35,000.

Raspberry Pi 4 Model B 2GB RAM Completely Upgraded

Raspberry Pi 4 Model B 4GB RAM Development Board

48,000

Raspberry Pi 4 Model B 4GB RAM Development BoardÂ