3

18650 Battery Holder 3 Cell in Pakistan 70.00

18650 Battery Holder 3 Cell in Pakistan

0 out of 5
(0)
SKU: N/AAdd to cart
Seven-segment-display-3-Digit-Common-Anod-Red 30.00

3 Digit 7 Seven Segment Display Common Anode Red

0 out of 5
(0)
SKU: N/A
  • Operating voltage 3.3V Red high quality light
  • Common Anode best quality Product
  • Bright Red light with high contrast.
  • Small Com-pack Technology
  • Crystal clear Very easy to use
Add to cart
4013-ic 25.00

4013 IC CD4013BE Type Flip Flop 3 to 18v 14 Pin DIP

0 out of 5
(0)
SKU: N/AAdd to cart
5 Axis MACH3 CNC with Adapter in Pakistan 750.00 800.00

5 Axis MACH3 CNC with Adapter in Pakistan

0 out of 5
(0)
SKU: N/A
  • Fully support of MACH3 and other computer software support for parallel port control.
  • USB power supply and peripherals powered phase separation to protect computer security.
  • Peripheral wide voltage input,12-24V, and anti-reverse function.
  • All of the input signals, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
  • All the way to the relay output port, control spindle switch. Output port P17 mouth.
  • All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
  • Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
  • P1 as PWM outputs can be controlled with optocoupler input spindle governor.
  • It can be accessed by a common cathode or common anode input level to 5V drive.
Add to cart
Original-High-Quality-Digital-Multimeter-LCR-High-Accuracy-20H-2000uF-Inductance-Resistance-Capacitance-Meter-Electrical-Tester 5,500.00

DM4070 Digital LCR Meter 3 1/2 20H 2000uF 20Mohm self discharge resistance inductance capacitance meter tester

0 out of 5
(0)
SKU: N/ARead more
PICkit 3 Programmer Board with Adapter in Pakistan 2,300.00 2,350.00

PICkit 3 Programmer Board with Adapter in Pakistan

0 out of 5
(0)
SKU: N/A

Technical Specifications of PICKit 3 Programmer Board:

 

Its full size is 93.50 x 39.80 x 12.90 +- 0.2 mm.

It has full speed USB support and using windows standard drivers.

It has real-time execution

Its processor runs at maximum speeds.

It has built-in over-voltage or short circuit monitors.

It has low voltages to 5V. and its range is 1.8V to 5V.

It can read/ write a program.

It has a data memory of the microcontroller.

It has diagnostic LEDs like Power, Active, and Status.

It has 1 erase of all memory types like EEPROM, ID, configuration, and Program with verification.

Its peripherals freeze at the breakpoint.

 

Add to cart
Seven-segment-display-3-Digit-Common-Anod-Red

3 Digit 7 Seven Segment Display Common Anode Red

0 out of 5
(0)
  • Operating voltage 3.3V Red high quality light
  • Common Anode best quality Product
  • Bright Red light with high contrast.
  • Small Com-pack Technology
  • Crystal clear Very easy to use
SKU: N/A
30.00 Add to cart
5 Axis MACH3 CNC with Adapter in Pakistan

5 Axis MACH3 CNC with Adapter in Pakistan

0 out of 5
(0)
  • Fully support of MACH3 and other computer software support for parallel port control.
  • USB power supply and peripherals powered phase separation to protect computer security.
  • Peripheral wide voltage input,12-24V, and anti-reverse function.
  • All of the input signals, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
  • All the way to the relay output port, control spindle switch. Output port P17 mouth.
  • All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
  • Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
  • P1 as PWM outputs can be controlled with optocoupler input spindle governor.
  • It can be accessed by a common cathode or common anode input level to 5V drive.
SKU: N/A
Availability:

98 in stock

750.00 800.00 Add to cart
PICkit 3 Programmer Board with Adapter in Pakistan

PICkit 3 Programmer Board with Adapter in Pakistan

0 out of 5
(0)

Technical Specifications of PICKit 3 Programmer Board:

 

Its full size is 93.50 x 39.80 x 12.90 +- 0.2 mm.

It has full speed USB support and using windows standard drivers.

It has real-time execution

Its processor runs at maximum speeds.

It has built-in over-voltage or short circuit monitors.

It has low voltages to 5V. and its range is 1.8V to 5V.

It can read/ write a program.

It has a data memory of the microcontroller.

It has diagnostic LEDs like Power, Active, and Status.

It has 1 erase of all memory types like EEPROM, ID, configuration, and Program with verification.

Its peripherals freeze at the breakpoint.

 

SKU: N/A
2,300.00 2,350.00 Add to cart
Seven-segment-display-3-Digit-Common-Anod-Red

3 Digit 7 Seven Segment Display Common Anode Red

0 out of 5
(0)
  • Operating voltage 3.3V Red high quality light
  • Common Anode best quality Product
  • Bright Red light with high contrast.
  • Small Com-pack Technology
  • Crystal clear Very easy to use
30.00 Add to cart
5 Axis MACH3 CNC with Adapter in Pakistan

5 Axis MACH3 CNC with Adapter in Pakistan

0 out of 5
(0)
  • Fully support of MACH3 and other computer software support for parallel port control.
  • USB power supply and peripherals powered phase separation to protect computer security.
  • Peripheral wide voltage input,12-24V, and anti-reverse function.
  • All of the input signals, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
  • All the way to the relay output port, control spindle switch. Output port P17 mouth.
  • All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
  • Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
  • P1 as PWM outputs can be controlled with optocoupler input spindle governor.
  • It can be accessed by a common cathode or common anode input level to 5V drive.
Availability:

98 in stock

750.00 800.00 Add to cart
PICkit 3 Programmer Board with Adapter in Pakistan

PICkit 3 Programmer Board with Adapter in Pakistan

0 out of 5
(0)

Technical Specifications of PICKit 3 Programmer Board:

 

Its full size is 93.50 x 39.80 x 12.90 +- 0.2 mm.

It has full speed USB support and using windows standard drivers.

It has real-time execution

Its processor runs at maximum speeds.

It has built-in over-voltage or short circuit monitors.

It has low voltages to 5V. and its range is 1.8V to 5V.

It can read/ write a program.

It has a data memory of the microcontroller.

It has diagnostic LEDs like Power, Active, and Status.

It has 1 erase of all memory types like EEPROM, ID, configuration, and Program with verification.

Its peripherals freeze at the breakpoint.

 

2,300.00 2,350.00 Add to cart
Seven-segment-display-3-Digit-Common-Anod-Red

3 Digit 7 Seven Segment Display Common Anode Red

0 out of 5
(0)
  • Operating voltage 3.3V Red high quality light
  • Common Anode best quality Product
  • Bright Red light with high contrast.
  • Small Com-pack Technology
  • Crystal clear Very easy to use
30.00 Add to cart
5 Axis MACH3 CNC with Adapter in Pakistan

5 Axis MACH3 CNC with Adapter in Pakistan

0 out of 5
(0)
  • Fully support of MACH3 and other computer software support for parallel port control.
  • USB power supply and peripherals powered phase separation to protect computer security.
  • Peripheral wide voltage input,12-24V, and anti-reverse function.
  • All of the input signals, all the light lotus isolated, which can be accessed emergency stop on the knife, the limit to protect computer security.
  • All the way to the relay output port, control spindle switch. Output port P17 mouth.
  • All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port P1 port.
  • Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled.
  • P1 as PWM outputs can be controlled with optocoupler input spindle governor.
  • It can be accessed by a common cathode or common anode input level to 5V drive.
750.00 800.00 Add to cart
PICkit 3 Programmer Board with Adapter in Pakistan

PICkit 3 Programmer Board with Adapter in Pakistan

0 out of 5
(0)

Technical Specifications of PICKit 3 Programmer Board:

 

Its full size is 93.50 x 39.80 x 12.90 +- 0.2 mm.

It has full speed USB support and using windows standard drivers.

It has real-time execution

Its processor runs at maximum speeds.

It has built-in over-voltage or short circuit monitors.

It has low voltages to 5V. and its range is 1.8V to 5V.

It can read/ write a program.

It has a data memory of the microcontroller.

It has diagnostic LEDs like Power, Active, and Status.

It has 1 erase of all memory types like EEPROM, ID, configuration, and Program with verification.

Its peripherals freeze at the breakpoint.

 

2,300.00 2,350.00 Add to cart

Showing all 6 results