
CH340 Lolin NodeMCU ESP8266 WiFi Board in Pakistan
SKU: N/AFeatures of NODEMCU LOLIN V3 :
- It uses CH340G instead of CP2102.
- It is a wireless 802.11 b/g/n standard.
- Its WiFi speed is 2.4GHz.
- It supports WPA/ WPA2 security mode.
- It supports STA/AP/STA + AP three operating modes.
- It has a built-in TCP/IP protocol stack to support multiple TCP Client connections. It has a maximum of 5 connections.
- It supports UART /GPIO data communication interface.
- It has remote firmware upgrade (OTA)
- It supports smart link smart networking.
- Users don’t need to download resetting.
- It has a great set of tools to develop ESP8266
- It is the lowest cost of WiFi.
- It is for Arduino like input-output hardware.
- This CH340G greatly speeds up the IoT application developing process.
- It is open-source, interactive, programmable, low cost, simple, smart, and WiFi-enabled.
- It has WiFi MCU ESP8266 integrated and it is easy to the prototyping development kit.
- This low-cost wifi module has built-in USB to TTL serial with super reliable industrial strength.
- It has advanced API for hardware IO.
- It also has Event-driven API for network applications.

D1-Mini WIFI Development Board in Pakistan
SKU: N/A- It contains 11 digital input/output pins.
- These all pins have interrupt/ PWM/ I2C/ one-wire (except D0).
- It has an analog input pin of 3.2V.
- It has a Micro USB connection.
- This WIFI board uses BRT (Bias Resistor Transistor).
- This board is easier in flash mode.

ESP8266 WiFi ESP-01 Serial Module in Pakistan
SKU: N/A- Its Wifi range is 802.11 b/g/n
- Its WIFi direct (P2P), soft-AP.
- It is an integrated TCP/IP protocol stack.
- It is an integrated TR switch, balun, LNA, power amplifier, and matching network.
- It is integrated PLLs, regulators, DCXO, and power management units.
- There is +19.5dBm output power in 802.11b mode.
- It has a power-down leakage current of <10uA.

ESP8266EX ESP8266-12F WiFi Module in Pakistan
SKU: N/ASpecs of ESP8266EX ESP8266-12F WiFi Module:
- Its model is ESP-12F.
- Its package is SMD22.
- Its size is 24 x 16 x 3 (+- 0.2)mm.
- Its certification is from FCC, CE,C,REACH,RoHS.
- It has default 32Mb SPI flash.
- It has a UART/ADC/GPIO/PWM interface.
- It has 9 input-output ports.
- It supports 300-4608000 bps and default 115200 bps UART baud rate.
- Its frequency range is 2412- 2484 MHz.
- It has a PCB antenna.
- Its power value is 500mA.
- Its modem sleep value is -20mA.
- Its light sleep value is -2mA.
- Its deep sleep value is -0.02mA.
- Its security is WEP/WPA-PSK/WPA2-PSK
- Its power supply voltages are 3 to 3.6V.
- Its current value is >500mA.
- Its operating temperature is -20 to 85-degree centigrade.
- Its storage environment is -40 to 85-degree centigrade.
- Its default baud rate is 115200.
- It has a TTL serial port level.

USB to ESP8266 Adapter Module in Pakistan
SKU: N/AFeatures of USB to ESP8266 Adapter Module:
It is a good companion of ESP8266. This USB to serial module converts the USB interface to the serial port. And it is suitable for ESP8266.
It is using CH340 serial chip. It is a more stable performance, and it is power compatible.
This module supports all Windows systems.
The main purpose of this USB to Serial connector is to connect ESP8266 and PC via the serial port.
It consists of a CH340 chip.
It has high-speed CPU frequency.
It can be used as a serial port WIFI.

Wemos D1 R1 WiFi Esp8266 Development Board in Pakistan
SKU: N/AWemos D1 Esp8266 Arduino Compatible WIFI Board

CH340 Lolin NodeMCU ESP8266 WiFi Board in Pakistan
Features of NODEMCU LOLIN V3 :
- It uses CH340G instead of CP2102.
- It is a wireless 802.11 b/g/n standard.
- Its WiFi speed is 2.4GHz.
- It supports WPA/ WPA2 security mode.
- It supports STA/AP/STA + AP three operating modes.
- It has a built-in TCP/IP protocol stack to support multiple TCP Client connections. It has a maximum of 5 connections.
- It supports UART /GPIO data communication interface.
- It has remote firmware upgrade (OTA)
- It supports smart link smart networking.
- Users don’t need to download resetting.
- It has a great set of tools to develop ESP8266
- It is the lowest cost of WiFi.
- It is for Arduino like input-output hardware.
- This CH340G greatly speeds up the IoT application developing process.
- It is open-source, interactive, programmable, low cost, simple, smart, and WiFi-enabled.
- It has WiFi MCU ESP8266 integrated and it is easy to the prototyping development kit.
- This low-cost wifi module has built-in USB to TTL serial with super reliable industrial strength.
- It has advanced API for hardware IO.
- It also has Event-driven API for network applications.

D1-Mini WIFI Development Board in Pakistan
- It contains 11 digital input/output pins.
- These all pins have interrupt/ PWM/ I2C/ one-wire (except D0).
- It has an analog input pin of 3.2V.
- It has a Micro USB connection.
- This WIFI board uses BRT (Bias Resistor Transistor).
- This board is easier in flash mode.


ESP8266 WiFi ESP-01 Serial Module in Pakistan
- Its Wifi range is 802.11 b/g/n
- Its WIFi direct (P2P), soft-AP.
- It is an integrated TCP/IP protocol stack.
- It is an integrated TR switch, balun, LNA, power amplifier, and matching network.
- It is integrated PLLs, regulators, DCXO, and power management units.
- There is +19.5dBm output power in 802.11b mode.
- It has a power-down leakage current of <10uA.


ESP8266EX ESP8266-12F WiFi Module in Pakistan
Specs of ESP8266EX ESP8266-12F WiFi Module:
- Its model is ESP-12F.
- Its package is SMD22.
- Its size is 24 x 16 x 3 (+- 0.2)mm.
- Its certification is from FCC, CE,C,REACH,RoHS.
- It has default 32Mb SPI flash.
- It has a UART/ADC/GPIO/PWM interface.
- It has 9 input-output ports.
- It supports 300-4608000 bps and default 115200 bps UART baud rate.
- Its frequency range is 2412- 2484 MHz.
- It has a PCB antenna.
- Its power value is 500mA.
- Its modem sleep value is -20mA.
- Its light sleep value is -2mA.
- Its deep sleep value is -0.02mA.
- Its security is WEP/WPA-PSK/WPA2-PSK
- Its power supply voltages are 3 to 3.6V.
- Its current value is >500mA.
- Its operating temperature is -20 to 85-degree centigrade.
- Its storage environment is -40 to 85-degree centigrade.
- Its default baud rate is 115200.
- It has a TTL serial port level.

USB to ESP8266 Adapter Module in Pakistan
Features of USB to ESP8266 Adapter Module:
It is a good companion of ESP8266. This USB to serial module converts the USB interface to the serial port. And it is suitable for ESP8266.
It is using CH340 serial chip. It is a more stable performance, and it is power compatible.
This module supports all Windows systems.
The main purpose of this USB to Serial connector is to connect ESP8266 and PC via the serial port.
It consists of a CH340 chip.
It has high-speed CPU frequency.
It can be used as a serial port WIFI.

Wemos D1 R1 WiFi Esp8266 Development Board in Pakistan
Wemos D1 Esp8266 Arduino Compatible WIFI Board

CH340 Lolin NodeMCU ESP8266 WiFi Board in Pakistan
Features of NODEMCU LOLIN V3 :
- It uses CH340G instead of CP2102.
- It is a wireless 802.11 b/g/n standard.
- Its WiFi speed is 2.4GHz.
- It supports WPA/ WPA2 security mode.
- It supports STA/AP/STA + AP three operating modes.
- It has a built-in TCP/IP protocol stack to support multiple TCP Client connections. It has a maximum of 5 connections.
- It supports UART /GPIO data communication interface.
- It has remote firmware upgrade (OTA)
- It supports smart link smart networking.
- Users don’t need to download resetting.
- It has a great set of tools to develop ESP8266
- It is the lowest cost of WiFi.
- It is for Arduino like input-output hardware.
- This CH340G greatly speeds up the IoT application developing process.
- It is open-source, interactive, programmable, low cost, simple, smart, and WiFi-enabled.
- It has WiFi MCU ESP8266 integrated and it is easy to the prototyping development kit.
- This low-cost wifi module has built-in USB to TTL serial with super reliable industrial strength.
- It has advanced API for hardware IO.
- It also has Event-driven API for network applications.

D1-Mini WIFI Development Board in Pakistan
- It contains 11 digital input/output pins.
- These all pins have interrupt/ PWM/ I2C/ one-wire (except D0).
- It has an analog input pin of 3.2V.
- It has a Micro USB connection.
- This WIFI board uses BRT (Bias Resistor Transistor).
- This board is easier in flash mode.

ESP8266 WiFi ESP-01 Serial Module in Pakistan
- Its Wifi range is 802.11 b/g/n
- Its WIFi direct (P2P), soft-AP.
- It is an integrated TCP/IP protocol stack.
- It is an integrated TR switch, balun, LNA, power amplifier, and matching network.
- It is integrated PLLs, regulators, DCXO, and power management units.
- There is +19.5dBm output power in 802.11b mode.
- It has a power-down leakage current of <10uA.

ESP8266-12E WiFi Module in Pakistan
ESP8266 12E WIFI MODULE

ESP8266EX ESP8266-12F WiFi Module in Pakistan
Specs of ESP8266EX ESP8266-12F WiFi Module:
- Its model is ESP-12F.
- Its package is SMD22.
- Its size is 24 x 16 x 3 (+- 0.2)mm.
- Its certification is from FCC, CE,C,REACH,RoHS.
- It has default 32Mb SPI flash.
- It has a UART/ADC/GPIO/PWM interface.
- It has 9 input-output ports.
- It supports 300-4608000 bps and default 115200 bps UART baud rate.
- Its frequency range is 2412- 2484 MHz.
- It has a PCB antenna.
- Its power value is 500mA.
- Its modem sleep value is -20mA.
- Its light sleep value is -2mA.
- Its deep sleep value is -0.02mA.
- Its security is WEP/WPA-PSK/WPA2-PSK
- Its power supply voltages are 3 to 3.6V.
- Its current value is >500mA.
- Its operating temperature is -20 to 85-degree centigrade.
- Its storage environment is -40 to 85-degree centigrade.
- Its default baud rate is 115200.
- It has a TTL serial port level.

USB to ESP8266 Adapter Module in Pakistan
Features of USB to ESP8266 Adapter Module:
It is a good companion of ESP8266. This USB to serial module converts the USB interface to the serial port. And it is suitable for ESP8266.
It is using CH340 serial chip. It is a more stable performance, and it is power compatible.
This module supports all Windows systems.
The main purpose of this USB to Serial connector is to connect ESP8266 and PC via the serial port.
It consists of a CH340 chip.
It has high-speed CPU frequency.
It can be used as a serial port WIFI.

Wemos D1 R1 WiFi Esp8266 Development Board in Pakistan
Wemos D1 Esp8266 Arduino Compatible WIFI Board

CH340 Lolin NodeMCU ESP8266 WiFi Board in Pakistan
Features of NODEMCU LOLIN V3 :
- It uses CH340G instead of CP2102.
- It is a wireless 802.11 b/g/n standard.
- Its WiFi speed is 2.4GHz.
- It supports WPA/ WPA2 security mode.
- It supports STA/AP/STA + AP three operating modes.
- It has a built-in TCP/IP protocol stack to support multiple TCP Client connections. It has a maximum of 5 connections.
- It supports UART /GPIO data communication interface.
- It has remote firmware upgrade (OTA)
- It supports smart link smart networking.
- Users don’t need to download resetting.
- It has a great set of tools to develop ESP8266
- It is the lowest cost of WiFi.
- It is for Arduino like input-output hardware.
- This CH340G greatly speeds up the IoT application developing process.
- It is open-source, interactive, programmable, low cost, simple, smart, and WiFi-enabled.
- It has WiFi MCU ESP8266 integrated and it is easy to the prototyping development kit.
- This low-cost wifi module has built-in USB to TTL serial with super reliable industrial strength.
- It has advanced API for hardware IO.
- It also has Event-driven API for network applications.

D1-Mini WIFI Development Board in Pakistan
- It contains 11 digital input/output pins.
- These all pins have interrupt/ PWM/ I2C/ one-wire (except D0).
- It has an analog input pin of 3.2V.
- It has a Micro USB connection.
- This WIFI board uses BRT (Bias Resistor Transistor).
- This board is easier in flash mode.

ESP8266 WiFi ESP-01 Serial Module in Pakistan
- Its Wifi range is 802.11 b/g/n
- Its WIFi direct (P2P), soft-AP.
- It is an integrated TCP/IP protocol stack.
- It is an integrated TR switch, balun, LNA, power amplifier, and matching network.
- It is integrated PLLs, regulators, DCXO, and power management units.
- There is +19.5dBm output power in 802.11b mode.
- It has a power-down leakage current of <10uA.

ESP8266-12E WiFi Module in Pakistan
ESP8266 12E WIFI MODULE

ESP8266EX ESP8266-12F WiFi Module in Pakistan
Specs of ESP8266EX ESP8266-12F WiFi Module:
- Its model is ESP-12F.
- Its package is SMD22.
- Its size is 24 x 16 x 3 (+- 0.2)mm.
- Its certification is from FCC, CE,C,REACH,RoHS.
- It has default 32Mb SPI flash.
- It has a UART/ADC/GPIO/PWM interface.
- It has 9 input-output ports.
- It supports 300-4608000 bps and default 115200 bps UART baud rate.
- Its frequency range is 2412- 2484 MHz.
- It has a PCB antenna.
- Its power value is 500mA.
- Its modem sleep value is -20mA.
- Its light sleep value is -2mA.
- Its deep sleep value is -0.02mA.
- Its security is WEP/WPA-PSK/WPA2-PSK
- Its power supply voltages are 3 to 3.6V.
- Its current value is >500mA.
- Its operating temperature is -20 to 85-degree centigrade.
- Its storage environment is -40 to 85-degree centigrade.
- Its default baud rate is 115200.
- It has a TTL serial port level.

USB to ESP8266 Adapter Module in Pakistan
Features of USB to ESP8266 Adapter Module:
It is a good companion of ESP8266. This USB to serial module converts the USB interface to the serial port. And it is suitable for ESP8266.
It is using CH340 serial chip. It is a more stable performance, and it is power compatible.
This module supports all Windows systems.
The main purpose of this USB to Serial connector is to connect ESP8266 and PC via the serial port.
It consists of a CH340 chip.
It has high-speed CPU frequency.
It can be used as a serial port WIFI.
