wifi module

ESP8266EX ESP8266-12F WiFi Module in Pakistan 280.00

ESP8266EX ESP8266-12F WiFi Module in Pakistan

0 out of 5
(0)
SKU: N/A

Specs of ESP8266EX ESP8266-12F WiFi Module:

 

  • Its model is ESP-12F.
  • Its package is SMD22.
  • Its size is 24 x 16 x 3 (+- 0.2)mm.
  • Its certification is from FCC, CE,C,REACH,RoHS.
  • It has default 32Mb SPI flash.
  • It has a UART/ADC/GPIO/PWM interface.
  • It has 9 input-output ports.
  • It supports 300-4608000 bps and default 115200 bps UART baud rate.
  • Its frequency range is 2412- 2484 MHz.
  • It has a PCB antenna.
  • Its power value is 500mA.
  • Its modem sleep value is -20mA.
  • Its light sleep value is -2mA.
  • Its deep sleep value is -0.02mA.
  • Its security is WEP/WPA-PSK/WPA2-PSK
  • Its power supply voltages are 3 to 3.6V.
  • Its current value is >500mA.
  • Its operating temperature is -20 to 85-degree centigrade.
  • Its storage environment is -40 to 85-degree centigrade.
  • Its default baud rate is 115200.
  • It has a TTL serial port level.

 

 

Add to cart
wifi-shield-arduino 8,000.00

WiFi Shield V2.2 for Arduino in Pakistan

0 out of 5
(0)
SKU: N/A

SPECIFICATION

 

  • Wifi Chip is  WizFi210
  • Radio Protocol is IEEE 802.11b/g/n Compatible
  • its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
  • its Modulation consist of DSSS and CCK
  • RF Operating Frequency is 2.4 – 2.497 GHz
  • Antenna Options are Chip antenna and U.FL connector for external antenna
  • Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
  • Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
  • RF Output Power (Typical) is 8dBm ± 1dBm
  • Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
  • I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
  • Power Source is approximate 3.3V
  • Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)

 

Add to cart
ESP8266EX ESP8266-12F WiFi Module in Pakistan

ESP8266EX ESP8266-12F WiFi Module in Pakistan

0 out of 5
(0)

Specs of ESP8266EX ESP8266-12F WiFi Module:

 

  • Its model is ESP-12F.
  • Its package is SMD22.
  • Its size is 24 x 16 x 3 (+- 0.2)mm.
  • Its certification is from FCC, CE,C,REACH,RoHS.
  • It has default 32Mb SPI flash.
  • It has a UART/ADC/GPIO/PWM interface.
  • It has 9 input-output ports.
  • It supports 300-4608000 bps and default 115200 bps UART baud rate.
  • Its frequency range is 2412- 2484 MHz.
  • It has a PCB antenna.
  • Its power value is 500mA.
  • Its modem sleep value is -20mA.
  • Its light sleep value is -2mA.
  • Its deep sleep value is -0.02mA.
  • Its security is WEP/WPA-PSK/WPA2-PSK
  • Its power supply voltages are 3 to 3.6V.
  • Its current value is >500mA.
  • Its operating temperature is -20 to 85-degree centigrade.
  • Its storage environment is -40 to 85-degree centigrade.
  • Its default baud rate is 115200.
  • It has a TTL serial port level.

 

 

SKU: N/A
280.00 Add to cart
wifi-shield-arduino

WiFi Shield V2.2 for Arduino in Pakistan

0 out of 5
(0)

SPECIFICATION

 

  • Wifi Chip is  WizFi210
  • Radio Protocol is IEEE 802.11b/g/n Compatible
  • its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
  • its Modulation consist of DSSS and CCK
  • RF Operating Frequency is 2.4 – 2.497 GHz
  • Antenna Options are Chip antenna and U.FL connector for external antenna
  • Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
  • Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
  • RF Output Power (Typical) is 8dBm ± 1dBm
  • Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
  • I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
  • Power Source is approximate 3.3V
  • Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)

 

SKU: N/A
8,000.00 Add to cart
ESP8266EX ESP8266-12F WiFi Module in Pakistan

ESP8266EX ESP8266-12F WiFi Module in Pakistan

0 out of 5
(0)

Specs of ESP8266EX ESP8266-12F WiFi Module:

 

  • Its model is ESP-12F.
  • Its package is SMD22.
  • Its size is 24 x 16 x 3 (+- 0.2)mm.
  • Its certification is from FCC, CE,C,REACH,RoHS.
  • It has default 32Mb SPI flash.
  • It has a UART/ADC/GPIO/PWM interface.
  • It has 9 input-output ports.
  • It supports 300-4608000 bps and default 115200 bps UART baud rate.
  • Its frequency range is 2412- 2484 MHz.
  • It has a PCB antenna.
  • Its power value is 500mA.
  • Its modem sleep value is -20mA.
  • Its light sleep value is -2mA.
  • Its deep sleep value is -0.02mA.
  • Its security is WEP/WPA-PSK/WPA2-PSK
  • Its power supply voltages are 3 to 3.6V.
  • Its current value is >500mA.
  • Its operating temperature is -20 to 85-degree centigrade.
  • Its storage environment is -40 to 85-degree centigrade.
  • Its default baud rate is 115200.
  • It has a TTL serial port level.

 

 

280.00 Add to cart
wifi-shield-arduino

WiFi Shield V2.2 for Arduino in Pakistan

0 out of 5
(0)

SPECIFICATION

 

  • Wifi Chip is  WizFi210
  • Radio Protocol is IEEE 802.11b/g/n Compatible
  • its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
  • its Modulation consist of DSSS and CCK
  • RF Operating Frequency is 2.4 – 2.497 GHz
  • Antenna Options are Chip antenna and U.FL connector for external antenna
  • Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
  • Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
  • RF Output Power (Typical) is 8dBm ± 1dBm
  • Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
  • I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
  • Power Source is approximate 3.3V
  • Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)

 

8,000.00 Add to cart
ESP8266EX ESP8266-12F WiFi Module in Pakistan

ESP8266EX ESP8266-12F WiFi Module in Pakistan

0 out of 5
(0)

Specs of ESP8266EX ESP8266-12F WiFi Module:

 

  • Its model is ESP-12F.
  • Its package is SMD22.
  • Its size is 24 x 16 x 3 (+- 0.2)mm.
  • Its certification is from FCC, CE,C,REACH,RoHS.
  • It has default 32Mb SPI flash.
  • It has a UART/ADC/GPIO/PWM interface.
  • It has 9 input-output ports.
  • It supports 300-4608000 bps and default 115200 bps UART baud rate.
  • Its frequency range is 2412- 2484 MHz.
  • It has a PCB antenna.
  • Its power value is 500mA.
  • Its modem sleep value is -20mA.
  • Its light sleep value is -2mA.
  • Its deep sleep value is -0.02mA.
  • Its security is WEP/WPA-PSK/WPA2-PSK
  • Its power supply voltages are 3 to 3.6V.
  • Its current value is >500mA.
  • Its operating temperature is -20 to 85-degree centigrade.
  • Its storage environment is -40 to 85-degree centigrade.
  • Its default baud rate is 115200.
  • It has a TTL serial port level.

 

 

280.00 Add to cart
wifi-shield-arduino

WiFi Shield V2.2 for Arduino in Pakistan

0 out of 5
(0)

SPECIFICATION

 

  • Wifi Chip is  WizFi210
  • Radio Protocol is IEEE 802.11b/g/n Compatible
  • its Supported Data Rates are 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
  • its Modulation consist of DSSS and CCK
  • RF Operating Frequency is 2.4 – 2.497 GHz
  • Antenna Options are Chip antenna and U.FL connector for external antenna
  • Networking Protocols used in it like UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(*)
  • Power Consumption(Typical) of the wifi shield module Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA
  • RF Output Power (Typical) is 8dBm ± 1dBm
  • Security Protocols are WEP, WPA/WPA2–PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
  • I/O Interface is UART, SPI(*), I2C(*), WAKE, ALARM, GPIOs
  • Power Source is approximate 3.3V
  • Dimensions(except Antenna) are 59 x 54 mm(2.32×2.13″)

 

8,000.00 Add to cart

Showing all 2 results