Futaba S3003 Compatible Standard Servo Servo Motor-360 Degree

This is the Futaba S3003 Standard Servo. This basic servo is used in cars, boats, or where standard servos are used. This is the replacement for the following servos, S138,S148,S22,S38 and S12. This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.

Futaba S3003 Servo Motor-360 Degree

• Control System: +Pulse Width Control 1520 usec Neutral
• Required Pulse: 3-5 Volt Peak to Peak Square Wave
• Operating Voltage: 4.8-6.0 Volts
• Operating Temperature Range: -20 to +60 Degree C
• Operating Speed (4.8V): 0.23sec/60 degrees at no load
• Operating Speed (6.0V): 0.19sec/60 degrees at no load
• Stall Torque (4.8V): 44 oz/in. (3.2kg.cm)
• Stall Torque (6.0V): 56.8 oz/in. (4.1kg.cm)
• Continuous Rotation : Yes
• Direction: Counter Clockwise/Pulse Traveling 1520-1900 usec
• Current Drain (4.8V): 7.2mA/idle
• Current Drain (6.0V): 8mA/idle
• Motor Type: 3 Pole Ferrite
• Potentiometer Drive: Indirect Drive
• Bearing Type: Plastic Bearing
• Gear Type: All Nylon Gears
• Connector Wire Length: 12″
• Dimensions: 1.6″ x 0.8″x 1.4″ (41 x 20 x 36mm)
• Speed: 0.23 sec/60° @ 4.8V, 0.19 sec/60° @ 6V
•