5 Channel Line Following Array – Tracking Sensor Module – Infrared Tracking Sensor Module BFD-1000
₨5505 Channel Line Tracking Sensor Module (BFD-1000) is a sensor board designed for use with line follower robots. This module has been sufficient to meet the day-to-day task of tracking, but also with the infrared distance sensor and touch detection sensor, the board makes your robot design able to adapt to the situation easily.
5 inch Touch Screen TFT HDMI LCD for Raspberry Pi
₨6,950- 800 × 480 high resolution, touch control
- Compatible and Direct-connect with any revision or Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
- Drivers provided (works with your own Raspbian / Ubuntu directly)
- HDMI interface for displaying, no I / Os required (however, the touch panel still needs I / Os)
- Backlight can be turned off to lower power consumption
- High quality immersion gold surface plating
5 Pin 12VDC DC 12V Coil Relay
Original price was: ₨45.₨38Current price is: ₨38.5 Pin 12VDC DC 12V Coil Relay
5 times 50mm Sunset Red Plastic Magnifying with Compass Handheld LED Reading Optical Magnifying Glass in Pakistan
₨300- Brand: non
- Magnification: 5
- Material: Glass lens ABS
- Scope of Application: physics teaching instrument
- Model: 0091
- Measurement range: physics teaching instrument
- Type: physics teaching instrument
- Dimension: 0091
- Effective diameter: 50
5.8GHZ Microwave Radar Sensor Module in Pakistan
Original price was: ₨690.₨630Current price is: ₨630.Specifications:
1. Working voltages are between 3.3-20VDC;
2. Standby quiescent current is <3mA;
3. Transmit power is <2mW;
4. The working environment temperature is almost -20 ~ +80 Centigrade;
5. it has Repeat Trigger by default
6. The output signal is a TTL level. it will high->3.3V/ and it will Low->0V;
7. Detection angle is 360°(spherical) no dead ends;
8. Detection range is almost 3-8 meters, the default setting about 7 meters
9. The working delay is 1 second to hundreds of seconds, the default setting 30S.
50 Watt Digital Display Soldering Iron Station Adjustable Temperature ESD Safe KADA 936D+
₨4,400- We provide lowest shipping cost and ship product on same day so you get it as soon as possible.
- Split design, small size, can be stack-up for space-saving.
- Easy to access fuse compartment on the side of the station. Not need to dismantle the whole station just to replace blown fuse anymore.
- Lightweight soldering handpiece suitable for long-time operation.
- High quality ceramic heater core, four-wire design, long lifespan and low cost.
- Anti-static / ESD safe, no creepage, no interference.
- Stable and accurate temperature setting of 200 ~ 480C
- Compatible with HAKKO 900M series soldering tips.
- Input Voltage :AC 220V ~ 240V
- Input Frequency :50/60Hz
- Plug type :Malaysia/British 13A fused 3-pins plug
- Power output :50W
- Temperature Range :200 ~ 480 C
- Tip and ground impedance :<2 Ohm
- Tip and ground potential :<2mV
50Kg Load Cell Sensor 3 Wire in Pakistan
₨190This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year’s resolutions, and then forget about a month later). This sensor can measure up to about 110 pounds. Check the video below for a simple explanation on how these work and how to use them.