
3 Digit 7 Seven Segment Display Common Anode Red
SKU: N/A- Operating voltage 3.3V Red high quality light
- Common Anode best quality Product
- Bright Red light with high contrast.
- Small Com-pack Technology
- Crystal clear Very easy to use

3.5 inch 320 X 480 TFT LCD Display Module with SD Slot PCB ILI9486 IC
SKU: N/A3.5 inch 320 X 480 TFT LCD Display Module w. Sd Slot PCB ILI9486 IC unit for Arduino STM32 C51 demo

8×8 Dot Matrix LED Display Module MAX7219
SKU: N/ADot matrix Square LED 8×8 display module MAX7219 single chip control

Arduino 0.96 inch IIC OLED Display 4PIN 128 x 64 I2C SSD1306 LCD Screen in Pakistan
SKU: N/A- 128 x 64 is its resolution.
- It contains a wide-angle. Its viewing angle is almost >160 degrees.
- It contains a chip which supports many control chip. OLED Display chip is fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
- It is ultra-low power consumption. 0.08W for full-screen lit.
- It supports 3V to 5V DC.
- Its working temperature is -30 to 70 degrees centigrade.
- OLED Module size is 27.0 x 27.0 x 4.1 mm.
- It consists of the I2C interface. Or needs 2 IO only.
- OLED Display consists of SSD1306.

DC to DC Step Down Buck Converter with 7 Segment Display LM2596 in Pakistan
SKU: N/A- its input voltage range is 4 to 40V DC.
- its output voltage range is 1.25 to 37V DC.
- its output voltages are adjustable.
- its output current value is 2A.
- its voltmeter range is 0 to 40V. but there is a 0.1V error.
- it has input reverse polarity protection.
- it contains a built-in output short circuit protection function.
- it has a built-in thermal shutdown function.
- its size is 6.1 x 3.4 x 12 cm.
- its weight is 22gm.

Dual USB 5V 1A 2.1A Power Bank Charging Module Circuit with Digital Display in Pakistan
SKU: N/A- It has 5V 1A micro USB input.
- Its USB output is 5A 2.1A.
- 5V 1A is its dual USB interface.
- It has an intelligent digital display.
- Its product size is 7 x 5 x 5 cm.
- It is used in liquid lithium-ion batteries 3.7 lithium-ion batteries only.

MAX7219 Dot Matrix Module Microcontroller 4 in 1 Display in Pakistan
SKU: N/A- A Dot Matrix Module can drive a total of 8 x 8 dot matrix overcast.
- Its working voltages are 5V.
- Its size is 12.8 x 3.2 x 1.3 cm.
- It contains 64 fixing screw holes and its diameter is 3mm.
- This module contains input and output interfaces. It also supports cascading multiple modules.
- This module contains an input port on the left side.

NVIDIA Jetson Nano Development Starter Kit 7inch Touch Display Camera TF Card
SKU: N/AThis is a development pack (Type C) designed for NVIDIA Jetson Nano, it includes: Jetson Nano Developer Kit official content (optional), 7inch IPS capacitive touch display, IMX219-77 camera board, 64GB class 10 TF card, and the power adapter. This pack is almost a robot in embryo, you can even “see” via its “eye”, now it’s your show time to bring the superior AI robot to life.

Seven 7 Segment Display Common Anode 6mm
SKU: N/AA seven segment LED display
Common cathode configuration
Right hand decimal point
Long lifetime operation
IC Compatible
Low power dissipation

Seven 7 Segment Display Common Cathode 6mm
SKU: N/AA seven segment LED display
Common cathode configuration
Right hand decimal point
Long lifetime operation
IC Compatible
Low power dissipation



3 Digit 7 Seven Segment Display Common Anode Red
- Operating voltage 3.3V Red high quality light
- Common Anode best quality Product
- Bright Red light with high contrast.
- Small Com-pack Technology
- Crystal clear Very easy to use

3.5 inch 320 X 480 TFT LCD Display Module with SD Slot PCB ILI9486 IC
3.5 inch 320 X 480 TFT LCD Display Module w. Sd Slot PCB ILI9486 IC unit for Arduino STM32 C51 demo


8×8 Dot Matrix LED Display Module MAX7219
Dot matrix Square LED 8×8 display module MAX7219 single chip control

Arduino 0.96 inch IIC OLED Display 4PIN 128 x 64 I2C SSD1306 LCD Screen in Pakistan
- 128 x 64 is its resolution.
- It contains a wide-angle. Its viewing angle is almost >160 degrees.
- It contains a chip which supports many control chip. OLED Display chip is fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
- It is ultra-low power consumption. 0.08W for full-screen lit.
- It supports 3V to 5V DC.
- Its working temperature is -30 to 70 degrees centigrade.
- OLED Module size is 27.0 x 27.0 x 4.1 mm.
- It consists of the I2C interface. Or needs 2 IO only.
- OLED Display consists of SSD1306.

DC to DC Step Down Buck Converter with 7 Segment Display LM2596 in Pakistan
- its input voltage range is 4 to 40V DC.
- its output voltage range is 1.25 to 37V DC.
- its output voltages are adjustable.
- its output current value is 2A.
- its voltmeter range is 0 to 40V. but there is a 0.1V error.
- it has input reverse polarity protection.
- it contains a built-in output short circuit protection function.
- it has a built-in thermal shutdown function.
- its size is 6.1 x 3.4 x 12 cm.
- its weight is 22gm.

Dual USB 5V 1A 2.1A Power Bank Charging Module Circuit with Digital Display in Pakistan
- It has 5V 1A micro USB input.
- Its USB output is 5A 2.1A.
- 5V 1A is its dual USB interface.
- It has an intelligent digital display.
- Its product size is 7 x 5 x 5 cm.
- It is used in liquid lithium-ion batteries 3.7 lithium-ion batteries only.

MAX7219 Dot Matrix Module Microcontroller 4 in 1 Display in Pakistan
- A Dot Matrix Module can drive a total of 8 x 8 dot matrix overcast.
- Its working voltages are 5V.
- Its size is 12.8 x 3.2 x 1.3 cm.
- It contains 64 fixing screw holes and its diameter is 3mm.
- This module contains input and output interfaces. It also supports cascading multiple modules.
- This module contains an input port on the left side.

NVIDIA Jetson Nano Development Starter Kit 7inch Touch Display Camera TF Card
This is a development pack (Type C) designed for NVIDIA Jetson Nano, it includes: Jetson Nano Developer Kit official content (optional), 7inch IPS capacitive touch display, IMX219-77 camera board, 64GB class 10 TF card, and the power adapter. This pack is almost a robot in embryo, you can even “see” via its “eye”, now it’s your show time to bring the superior AI robot to life.

Seven 7 Segment Display Common Anode 6mm
A seven segment LED display
Common cathode configuration
Right hand decimal point
Long lifetime operation
IC Compatible
Low power dissipation

Seven 7 Segment Display Common Cathode 6mm
A seven segment LED display
Common cathode configuration
Right hand decimal point
Long lifetime operation
IC Compatible
Low power dissipation

20×4 Character LCD Display
20×4 LCD Display

3 Digit 7 Seven Segment Display Common Anode Red
- Operating voltage 3.3V Red high quality light
- Common Anode best quality Product
- Bright Red light with high contrast.
- Small Com-pack Technology
- Crystal clear Very easy to use

3.5 inch 320 X 480 TFT LCD Display Module with SD Slot PCB ILI9486 IC
3.5 inch 320 X 480 TFT LCD Display Module w. Sd Slot PCB ILI9486 IC unit for Arduino STM32 C51 demo


8×8 Dot Matrix LED Display Module MAX7219
Dot matrix Square LED 8×8 display module MAX7219 single chip control

Arduino 0.96 inch IIC OLED Display 4PIN 128 x 64 I2C SSD1306 LCD Screen in Pakistan
- 128 x 64 is its resolution.
- It contains a wide-angle. Its viewing angle is almost >160 degrees.
- It contains a chip which supports many control chip. OLED Display chip is fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
- It is ultra-low power consumption. 0.08W for full-screen lit.
- It supports 3V to 5V DC.
- Its working temperature is -30 to 70 degrees centigrade.
- OLED Module size is 27.0 x 27.0 x 4.1 mm.
- It consists of the I2C interface. Or needs 2 IO only.
- OLED Display consists of SSD1306.

DC to DC Step Down Buck Converter with 7 Segment Display LM2596 in Pakistan
- its input voltage range is 4 to 40V DC.
- its output voltage range is 1.25 to 37V DC.
- its output voltages are adjustable.
- its output current value is 2A.
- its voltmeter range is 0 to 40V. but there is a 0.1V error.
- it has input reverse polarity protection.
- it contains a built-in output short circuit protection function.
- it has a built-in thermal shutdown function.
- its size is 6.1 x 3.4 x 12 cm.
- its weight is 22gm.

Dual USB 5V 1A 2.1A Power Bank Charging Module Circuit with Digital Display in Pakistan
- It has 5V 1A micro USB input.
- Its USB output is 5A 2.1A.
- 5V 1A is its dual USB interface.
- It has an intelligent digital display.
- Its product size is 7 x 5 x 5 cm.
- It is used in liquid lithium-ion batteries 3.7 lithium-ion batteries only.

MAX7219 Dot Matrix Module Microcontroller 4 in 1 Display in Pakistan
- A Dot Matrix Module can drive a total of 8 x 8 dot matrix overcast.
- Its working voltages are 5V.
- Its size is 12.8 x 3.2 x 1.3 cm.
- It contains 64 fixing screw holes and its diameter is 3mm.
- This module contains input and output interfaces. It also supports cascading multiple modules.
- This module contains an input port on the left side.

NVIDIA Jetson Nano Development Starter Kit 7inch Touch Display Camera TF Card
This is a development pack (Type C) designed for NVIDIA Jetson Nano, it includes: Jetson Nano Developer Kit official content (optional), 7inch IPS capacitive touch display, IMX219-77 camera board, 64GB class 10 TF card, and the power adapter. This pack is almost a robot in embryo, you can even “see” via its “eye”, now it’s your show time to bring the superior AI robot to life.

Seven 7 Segment Display Common Anode 6mm
A seven segment LED display
Common cathode configuration
Right hand decimal point
Long lifetime operation
IC Compatible
Low power dissipation

Seven 7 Segment Display Common Cathode 6mm
A seven segment LED display
Common cathode configuration
Right hand decimal point
Long lifetime operation
IC Compatible
Low power dissipation

20×4 Character LCD Display
20×4 LCD Display

3 Digit 7 Seven Segment Display Common Anode Red
- Operating voltage 3.3V Red high quality light
- Common Anode best quality Product
- Bright Red light with high contrast.
- Small Com-pack Technology
- Crystal clear Very easy to use

3.5 inch 320 X 480 TFT LCD Display Module with SD Slot PCB ILI9486 IC
3.5 inch 320 X 480 TFT LCD Display Module w. Sd Slot PCB ILI9486 IC unit for Arduino STM32 C51 demo

8×8 Dot Matrix LED Display Module MAX7219
Dot matrix Square LED 8×8 display module MAX7219 single chip control

Arduino 0.96 inch IIC OLED Display 4PIN 128 x 64 I2C SSD1306 LCD Screen in Pakistan
- 128 x 64 is its resolution.
- It contains a wide-angle. Its viewing angle is almost >160 degrees.
- It contains a chip which supports many control chip. OLED Display chip is fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
- It is ultra-low power consumption. 0.08W for full-screen lit.
- It supports 3V to 5V DC.
- Its working temperature is -30 to 70 degrees centigrade.
- OLED Module size is 27.0 x 27.0 x 4.1 mm.
- It consists of the I2C interface. Or needs 2 IO only.
- OLED Display consists of SSD1306.

DC to DC Step Down Buck Converter with 7 Segment Display LM2596 in Pakistan
- its input voltage range is 4 to 40V DC.
- its output voltage range is 1.25 to 37V DC.
- its output voltages are adjustable.
- its output current value is 2A.
- its voltmeter range is 0 to 40V. but there is a 0.1V error.
- it has input reverse polarity protection.
- it contains a built-in output short circuit protection function.
- it has a built-in thermal shutdown function.
- its size is 6.1 x 3.4 x 12 cm.
- its weight is 22gm.

Dual USB 5V 1A 2.1A Power Bank Charging Module Circuit with Digital Display in Pakistan
- It has 5V 1A micro USB input.
- Its USB output is 5A 2.1A.
- 5V 1A is its dual USB interface.
- It has an intelligent digital display.
- Its product size is 7 x 5 x 5 cm.
- It is used in liquid lithium-ion batteries 3.7 lithium-ion batteries only.

MAX7219 Dot Matrix Module Microcontroller 4 in 1 Display in Pakistan
- A Dot Matrix Module can drive a total of 8 x 8 dot matrix overcast.
- Its working voltages are 5V.
- Its size is 12.8 x 3.2 x 1.3 cm.
- It contains 64 fixing screw holes and its diameter is 3mm.
- This module contains input and output interfaces. It also supports cascading multiple modules.
- This module contains an input port on the left side.

NVIDIA Jetson Nano Development Starter Kit 7inch Touch Display Camera TF Card
This is a development pack (Type C) designed for NVIDIA Jetson Nano, it includes: Jetson Nano Developer Kit official content (optional), 7inch IPS capacitive touch display, IMX219-77 camera board, 64GB class 10 TF card, and the power adapter. This pack is almost a robot in embryo, you can even “see” via its “eye”, now it’s your show time to bring the superior AI robot to life.

Seven 7 Segment Display Common Anode 6mm
A seven segment LED display
Common cathode configuration
Right hand decimal point
Long lifetime operation
IC Compatible
Low power dissipation

Seven 7 Segment Display Common Cathode 6mm
A seven segment LED display
Common cathode configuration
Right hand decimal point
Long lifetime operation
IC Compatible
Low power dissipation