OPA392 Precision Op Amp: 7 Checks for Noise Bandwidth and ADC Settling
OPA392 checks for package-specific offset, integrated noise, rising and falling settling, output loading and input overdrive.
Blog
ADS7138 ADC: 7 Checks for Autonomous Window Alerts and Scan Timing
ADS7138 checks for meaningful window thresholds, consecutive-event counting, scan cadence, alert mapping and CRC-aware recovery.
TLV759P Adjustable LDO: 7 Checks for Feedback Error and Startup
TLV759P checks for the 0.55 V feedback equation, divider loading, temperature accuracy, capacitor choices and startup trade-offs.
TPS22946 Load Switch: 7 Checks for Sampled Limits and Fault Windows
TPS22946 checks for startup-sampled CL states, limit tolerances, elevated inrush current, fault blanking, retries and shutoff.
SN74LVC1G14 Inverter: 7 Checks for Active-Low Schmitt Signal Paths
SN74LVC1G14 checks for inverted idle states, Schmitt thresholds, down-translation, output contention and powered-off behavior.
TCA9517 I2C Repeater: 7 Checks for Buffered Lows and Bus Topology
TCA9517 checks for asymmetric low levels, pull-ups on both sides, forbidden B-to-B connections, enable thresholds and stretching.
TMUX4051 Analog Mux: 7 Checks for Bipolar Rails and ADC Boundaries
TMUX4051 checks for single or bipolar supply limits, active-low enable, analog current limits and downstream ADC protection.
INA381 Current Monitor: 7 Checks for Comparator Routing and Alert Timing
INA381 checks for the separate CMPIN path, externally driven threshold, gain selection, latched alerts and end-to-end timing.
UCC27519 Gate Driver: 7 Checks for CMOS Input Thresholds and Enable
UCC27519 checks for supply-dependent PWM thresholds, a different enable threshold, noninverting logic and protected gate-load tests.
TLC5916 LED Driver: 7 Checks for Diagnostic Modes and Global Gain
TLC5916 checks for shared control-pin modes, diagnostic readback, global current gain, latch behavior and safe LED loading.