INA254 Current Monitor: 7 Checks for Its Integrated Shunt
Plan INA254 current sensing with the 400 microohm shunt, exact gain, reference connections and total package heating.
Blog
TPS62825 Buck Converter: 7 Checks for a Real 2 A Rail
Check TPS62825 two-ampere rail design through exact variant choice, LC selection, light-load operation and dropout conditions.
OPA859 FET Amplifier: 7 Checks Beyond Unity-Gain Stability
Plan OPA859 amplifier stages with distinct bandwidth definitions, input headroom, detector capacitance and referenced power-down control.
TPS7A89 Dual LDO: 7 Checks for Two High-Current Quiet Rails
Plan TPS7A89 dual 2 A rails with dropout margin, shared package heating, soft-start controls and meaningful power-good checks.
ADS131M03 ADC: 7 Checks for Coherent Three-Channel Records
Build ADS131M03 acquisition around five-word SPI frames, CRC behavior, FIFO recovery and validated three-channel timing.
TPS22966 Load Switch: 7 Checks for Two Controlled Rails
Plan TPS22966 dual-rail switching with shared bias, individual ramp capacitors, output discharge and combined thermal limits.
THVD1451 RS-485 Transceiver: 7 Checks for Full-Duplex Links
Design THVD1451 full-duplex links around separate transmit and receive pairs, fixed enables, termination and logic compatibility.
TMUX1109 Multiplexer: 7 Checks for Paired Analog Channels
Plan TMUX1109 paired-channel selection with supply-bounded signals, active-high enable, leakage error and settling time.
UCC27512 Gate Driver: 7 Checks for Its Single Output
Check UCC27512 single-output pin mapping, dual-input logic, supply headroom and gate-loop stress before switching a MOSFET.
LP5860 LED Matrix Driver: 7 Checks for Coherent Display Frames
Plan an LP5860 LED matrix around scan duty, current, SRAM addressing, refresh modes and qualified fault detection.